Jump to content

Garbage truck

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Lumizan (talk | contribs) at 18:47, 21 February 2024 (XIN ĐỪNG CHÈN LINK RÁC). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Not to be confused with Dump truck.
"Trash truck" redirects here. For the Netflix streaming television series, see Trash Truck (TV series).
A Garbage Truck Peterbilt In Los Angeles
A Scania front loader

A garbage truck is a truck specially designed to collect municipal solid waste and transport it to a solid waste treatment facility, such as a landfill, recycling center or transfer station. In Australia they are commonly called rubbish trucks, or garbage trucks, while in the U.K. dustbin lorry, rubbish lorry or bin lorry is commonly used. Other common names for this type of truck include trash truck in the United States, and refuse truck, dustcart, junk truck, bin wagon or bin van elsewhere. Technical names include waste collection vehicle and refuse collection vehicle (RCV). These trucks are a common sight in most urban areas.

History

Thornycroft Steam Dust-Cart of 1897 with tipper body

Wagons and other means had been used for centuries to haul away solid waste. Among the first self-propelled garbage trucks were those ordered by Chiswick District Council from the Thornycroft Steam Wagon and Carriage Company in 1897 described as a steam motor tip-car, a new design of body specific for "the collection of dust and house refuse".[1]

The 1920s saw the first open-topped trucks being used, but due to foul odors and waste falling from the back, covered vehicles soon became more common. These covered trucks were first introduced in more densely populated Europe and then in North America, but were soon used worldwide.

The main difficulty was that the waste collectors needed to lift the waste to shoulder height. The first technique developed in the late 1920s to solve this problem was to build round compartments with corkscrews that would lift the load and bring it away from the rear. A more efficient model was the development of the hopper in 1929. It used a cable system that could pull waste into the truck.

In 1937, George Dempster invented the Dempster-Dumpster system in which wheeled waste containers were mechanically tipped into the truck. His containers were known as Dumpsters, which led to the word dumpster entering the language.

In 1938, the Garwood Load Packer revolutionized the industry when including a compactor in the truck was implemented. The first compactor could double a truck's capacity. This was made possible by use of a hydraulic press which periodically compacted the contents of the truck.

RS-3 Lightning Rear Steer truck

In 1955 the Dempster Dumpmaster, the first front loader, was introduced. They did not become common until the 1970s. The 1970s also saw the introduction of smaller dumpsters, often known as wheelie bins, which were also emptied mechanically. Since that time there has been little dramatic change, although there have been various improvements to the compaction mechanisms to improve payload. In the mid-1970s Petersen Industries introduced the first grapple truck for municipal waste collection.

In 1969, the city of Scottsdale, Arizona introduced the world's first automated side loader. The new truck could collect 300 gallon containers in 30 second cycles, without the driver exiting the cab.[2]

In 1997, Lee Rathbun introduced the Lightning Rear Steer System. This system includes an elevated, rear-facing cab for both driving the truck and operating the loader. This configuration allows the operator to follow behind haul trucks and load continuously.

Types

A standard Waste Management Inc. front-loading garbage truck in San Jose, California

Front loaders

Front loaders generally service commercial and industrial businesses using large waste containers with lids known as Dumpsters in the US.[3] The truck is equipped with powered forks on the front which the driver carefully aligns with sleeves on the waste container using a joystick or a set of levers. The waste container is then lifted over the truck. Once it gets to the top the container is then flipped upside down and the waste or recyclable material is emptied into the vehicle's hopper. Once the waste is dumped, it is compacted by a hydraulically powered moving wall that oscillates backwards and forwards to push the waste to the rear of the vehicle.[4]

Most of the newer packing trucks have "pack-on-the-go hydraulics" which lets the driver pack loads while driving, allowing faster route times.[5] When the body is full, the compaction wall moves all the way to the rear of the body, ejecting it via an open tailgate. There is also a system called the Curotto Can which is an attachment for a front loader that has an automated arm that functions as an automated side loader that allows the driver to dump carts.

14.5 m3 rear load container serviced in Copenhagen
Garbagemen loading garbage by hand in Japan, 2013

Rear loaders

Rear loaders have an opening into a trough or hopper at the rear that a waste collector can throw waste bags or empty the contents of bins into. Often in many areas they have a lifting mechanism to automatically empty large carts without the operator having to lift the waste by hand.[6]

Another popular system for the rear loader is a rear load container specially built to fit a groove in the truck. The truck will have a chain or cable system for upending the container. The waste will then slide into the hopper of the truck.

The modern rear loader usually compacts the waste using a hydraulically powered mechanism that employs a moving plate or shovel to scoop the waste out from the loading hopper and compress it against a moving wall. In most compactor designs, the plate has a pointed edge (hence giving it the industry standard name packer blade) which is designed to apply point pressure to the waste to break down bulky items in the hopper before being drawn into the main body of the truck. [7] Compactor designs have been many and varied, however the two most popular in use today are the "sweep and slide" system (first pioneered on the Leach 2R Packmaster), where the packer blade pivots on a moving carriage which slides back and forth in large tracks fabricated into the body sides, and the "swing link" system (such as the Dempster Routechief) where the blade literally swings on a "pendulum"-style mechanism consisting of links which control the arc of the blade's movement. The Geesink GPM series uses a pivoting packer blade which swings on an inverted U-shaped frame which lowers the blade into the hopper, where it sweeps the waste out; the frame then retracts back into the body to perform the compaction action. The Heil Colectomatic is a hybrid between the two philosophies- it used a combination of a lifting loading hopper and a pivoting sweeper blade to clear and compact waste in anticipation of the next load.

So-called "continuous" compactors were popular in the 1960s and 1970s. The German Shark design (later Rotopress) used a huge rotating drum fitted with spiral shaped paddles to draw waste in, and force it around an auger of decreasing pitch to compress it. SEMAT-Rey of France pioneered the rotating rake system (also used in the British Shelvoke and Drewry Revopak) to simultaneously shred and compress the waste as it is loaded. Other systems used a continuously rotating Archimedes' screw to draw in waste and mutilate it inside the body. A mixture of safety concerns, and higher fuel consumption has seen a decline in the popularity of continuously compacting garbage trucks, with only the Rotopress design remaining in production due to its niche in being able to effectively deal with green waste for composting.

A unique rear-loading system involves a rear loader and a front-loading tractor (usually a Caterpillar front loader with a Tink Claw) for yard waste collection (and in some cities, garbage and recycling). The front loader picks up yard waste set in the street, and then loaded into the back of a rear loader. This system is used in several cities, including San Jose.

Side loaders

Side loaders are loaded from the side, either manually, or with the assistance of a joystick-controlled robotic arm with a claw, used to automatically lift and tip wheeled bins into the truck's hopper.

Manual side loaders

A Lōdal Evo T-28 manual side loader

Manual side loaders (MSLs) feature a hopper in front of the body, similar to front loaders. Unlike front loaders, the actual hopper is very short, and sometimes is lower than the body, in order for the operator to dump the waste into the hopper. This also results in longer times for packing loads compared to rear loaders, although this can be offset by the time bringing waste to the truck. On some (but not all) vehicle models the hopper can be accessed from both sides, allowing two persons to collect waste from both sides of the street simultaneously and increasing vehicle efficiency.

Automated side loaders

A WhiteGMC WXLL/Heil Python automated side loader. Note the collection of two containers, as opposed to one.

Lift-equipped trucks are referred to as automated side loaders (ASLs). Similar to a front-end loader, the waste is compacted by an oscillating packer plate at the front of the loading hopper which forces the waste through an aperture into the main body and is therefore compacted towards the rear of the truck.[8]

An automated side loader only needs one operator, whereas a traditional rear load garbage truck may require two or three people,[9] and has the additional advantage of reducing on the job injuries due to repetitive heavy lifting. Due to these advantages, ASLs have become more popular than traditional manual collection. Typically an automated side loader uses standardized wheeled carts compatible with the truck's automated lift.[10]

As with front loaders, the compaction mechanism comprises a metal pusher plate in the collection hopper which oscillates backwards and forwards under hydraulic pressure, pushing the refuse through an aperture, thus compacting it against the material already loaded. On some ASLs there is also a "folding" crusher plate positioned above the opening in the hopper, that folds down to crush bulky items within reach of the metal pusher plate. Another compactor design is the "paddle packer" which uses a paddle that rotates from side to side, forcing refuse into the body of the truck.

Manual/Automated side loaders

Manual/Automated side loaders (M/ASLs), are traditional MSLs equipped with an arm for automated collection, as well as continuously running packers. This allows for functionally identical to that of an ASL, while allowing for manual dumping of waste into hopper in instances where automated collection is not feasible, such as the collection of oversized items. In addition, M/ASLs provide a cheaper upgrade path for those who wish to keep preexisting MSLs for automated collection without paying for newer and more expensive ASLs.

Semi-automated side loaders

Semi-automated side loaders are MSLs that are equipped with an automated mechanism to lift and dump manually aligned waste containers into the hopper. The primary difference between semi-automated side loaders and ASLs is that while they still only need one person to operate, he or she must exit the cab to manually bring and align containers to the loading hopper on the side of the truck and dump them.[citation needed]

Specialized garbage trucks

Split body trucks

Split body rear loading waste collection truck

Split body trucks are garbage trucks that have two collection compartments, one on the left side of the truck and the other on the right side of the truck. This is used to separate the materials that are not supposed to mix together. An example is to use one side to collect garbage and the other side to collect recyclables. Waste management companies may use split body trucks to collect both garbage and recycling in a single trip without dispatching two trucks on the same route.[11]

Another case of using split body trucks is to collect dual-stream recycling materials. In this case, one side is used for commingled recyclable materials such as glass, plastic and metals, and the other side is for paper products.[12]

Split body trucks can be in either rear loading or side loading types. In rear loaders, the two compartments are easily visible. In automatic side loaders, the gate-like separator at the top of the truck is used to control whether the materials will be dropped into the left or the right compartment but the loading process is the same for both compartments. This can create some confusion for people because they may not notice the automatic gate and assume that the truck mixes garbage and recyclables during the collection process.[13]

Pneumatic collection

See also: Automated vacuum collection
Volvo pneumatic collector used for "waste suction"

Pneumatic collection trucks have a crane with a tube and a mouthpiece that fits in a hole, usually hidden under a plate under the street. From here it will suck up waste from an underground installation. The system usually allows the driver to "pick up" the waste, even if the access is blocked by cars, snow or other barriers.

Grapple truck

Grapple trucks

Main article: Grapple truck

Grapple trucks enable the collection of bulk waste. A large percentage of items in the solid waste stream are too large or too heavy to be safely lifted by hand into traditional garbage trucks. These items (furniture, large appliances, branches, logs) are called bulky waste or "oversized." The preferred method for collecting these items is with a grapple truck. Grapple trucks have hydraulic knucklebooms, tipped with a clamshell bucket, and usually include a dump body or trailer.

Roll-offs

Main article: Roll-off (dumpster)

Roll-offs are characterized by a rectangular footprint, utilizing wheels to facilitate rolling the dumpster in place. The container is designed to be transported by special roll-off trucks. They are relatively efficient for bulk loads of waste or extremely heavy loads of construction or demolition debris.[14]

Bin tipper

A rear loader with a bin tipper

A bin tipper is a machine which mechanically lifts and inverts bins for the purpose of emptying them. They are often components of larger machines such as garbage trucks, or can be 'standalone' or mobile units.[15] Bin tippers usually have a steel frame, guarding and cradle, with a motor or crank-handle driving a lifting mechanism, which may be hydraulic or chain operated. Bins are placed into the machine, then lifted and inverted over the destination receptacle, allowing the contents to be emptied by gravity.

A side-load bin tipper was fitted to a garbage truck as early as 1929, by the Heil company in America. In the 1950s the Dempster Dumpmaster popularized the front-end loader variant, with bins being tipped over the cab of the truck. Both types of integrated bin tipper are now common on municipal refuse collection trucks. Standalone bin tippers developed later, with the release of a machine called the Simpro Ezi-Dump in 1990.

The use of bin tippers and other lifting aids has been stimulated in recent years by research linking heavy manual lifting with musculoskeletal disorders;[16][17] some government organisations,[18] schools[19] and companies now prohibit emptying bins by hand. Health and safety concerns have also driven the adoption of bin tippers in the manufacturing, food-processing and construction industries.[20]

See also

Wikimedia Commons has media related to Waste collection trucks.

References

  1. ^ "Motor-Cars for Dust Collection", The Automotor and Horseless Carriage Journal, February 1897, p192
  2. ^ City of Scottsdale, Arizona, Solid Waste Management Division - Classic Refuse Trucks, November 6, 2005.
  3. ^ Geroux, Zachary; Voytko, Eric. "The Ever Expanding History of the Front Load Refuse Truck". Retrieved 10 September 2014.
  4. ^ "Classic Refuse Trucks FRONT LOADERS". www.classicrefusetrucks.com. Retrieved 11 April 2018.
  5. ^ "Heil Expands Operate-At-Idle Offering". 4 February 2005. Retrieved 10 September 2014.
  6. ^ "Heil Formula 5000 Rear Loader using lifter". YouTube. Archived from the original on 2021-12-12.
  7. ^ Jordan, Dorris, M. "Local Dumpster Rental Melbourne FL". Retrieved 18 December 2021.{{cite news}}: CS1 maint: multiple names: authors list (link)
  8. ^ "How garbage truck is made - material, used, parts, components, steps, industry, machine". www.madehow.com. Retrieved 11 April 2018.
  9. ^ Sean, Murphy (3 April 2014). "Automated Garbage Collection". Retrieved 10 September 2014.
  10. ^ Marc J. Rogoff (2014). "Solid waste collection automation in the United States". Waste Management & Research. 32 (11): 1031–1033. Bibcode:2014WMR....32.1031R. doi:10.1177/0734242X14558164. PMID 25378253. S2CID 29990805.
  11. ^ Somers, Brennan (8 February 2021). "Good Question: Are they mixing trash and recyclables?". WHEC. Retrieved 12 June 2023.
  12. ^ Thayer, Warren (17 November 2022). "Cheaper Than Landfills: How Well Gulfport Recycles – Really". The Gabber. Retrieved 12 June 2023.
  13. ^ Silvy, Tyler (24 August 2021). "Ask the PAC: Why is the same Recology truck picking up curbside trash and recycling in Petaluma?". Argus Courier. Retrieved 12 June 2023.
  14. ^ "Waste Truck Collection Systems". Truckworld Australia. TruckWorld.com.au. 11 February 2015. Retrieved 18 August 2022.
  15. ^ "Bin Tippers From Solus Group On Display At WasteExpo Trade Show". solusgrp.com. Retrieved 11 April 2018.
  16. ^ "OSH in figures: Work-related musculoskeletal disorders in the EU - Facts and figures | Safety and health at work EU-OSHA".
  17. ^ Velasco Garrido, M; Bittner, C; Harth, V; Preisser, AM (2015). "Health status and health-related quality of life of municipal waste collection workers - a cross-sectional survey". J Occup Med Toxicol. 10: 22. doi:10.1186/s12995-015-0065-6. PMC 4493964. PMID 26155300.
  18. ^ "Archived copy" (PDF). Archived from the original (PDF) on 2016-07-05. Retrieved 2017-10-04.{{cite web}}: CS1 maint: archived copy as title (link)
  19. ^ http://www.gaps.qld.edu.au/Discover%20Us/Documents/Manual-Handling-of-Wheelie-Bins.pdf [bare URL PDF]
  20. ^ "Dumpmaster used to reduce manual handling Best Practice Hub". ccsbestpractice.org.uk. Retrieved 11 April 2018.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Garbage_truck&oldid=1209396810"