Solar energy

Heat and light from the sun fuel life on earth.

The total solar energy available to the earth is approximately 3850 zettajoules (ZJ) per year.

Solar power is the flow of energy from the sun. The primary forms of solar energy are heat and light. Sunlight and heat are transformed and absorbed by the environment in a multitude of ways. Some of these transformations result in renewable energy flows such as biomass, wind and waves. Effects such as the jet stream, the Gulf Stream and the water cycle are also the result of solar energy's absorption in the environment.

Solar energy also broadly describes technologies that utilize sunlight. The applications are diverse and date back millennia. The Greeks, Native Americans and Chinese warmed their buildings by orienting them toward the sun. European farmers used elaborate field orientation and thermal mass to increase crop yields during the Little Ice Age. Modern solar technologies continue to harness the sun to provide water heating, daylighting and even flight.

The term solar power specifically describes technologies that convert sunlight into electricity or mechanical power. In 1866, the French engineer Auguste Mouchout successfully powered a steam engine with sunlight. This is the first known example of a solar powered mechanical device. Over the next 50 years inventors such as John Ericsson, Charles Tellier and Frank Shuman developed solar powered devices for irrigation, refrigeration and locomotion. The progeny of these early developments are concentrating solar power plants.

In 1954, researchers at Bell Laboratories developed a solar cell capable of converting light into electricity via the photovoltaic effect. This breakthrough marked a fundamental change in how power is generated. Since then solar cells have progressed from early cells priced at $1500 per watt to modern cells which can cost less than $3 per watt.

The utilization of solar energy spans from traditional technologies that provide food, heat and light to electricity which is uniquely modern. The diversity of form and long history of solar energy are manifest in a wide variety of applications. These include:

• Heat (hot water, building heat, cooking, process heat)
• Lighting (daylighting, hybrid lighting, daylight savings time)
• Electricity generation (photovoltaics, heat engines)
• Transportation (solar car, solar plane, solar boat)
• Desalination
• Biomass (wood, biofuel)
• Clothes drying

Energy from the Sun

Solar power as it is dispersed on the planet and radiated back to space. Values are in PW =10¹⁵ W

Annual average insolation at the top of Earth's atmosphere (top) and at the surface (bottom). The black dots represent the land area required to replace the total primary energy supply with electricity from solar cells.

The Earth receives 174 petawatts (PW) of solar radiation at the upper atmosphere. While traveling through the atmosphere, 6% of the incoming solar radiation (insolation) is reflected and 16% is absorbed. Average atmospheric conditions (clouds, dust, pollutants) further reduce insolation by 20% through reflection and 3% through absorption. The absorption of solar energy by atmospheric convection (sensible heat transport) and by the evaporation and condensation of water vapor (latent heat transport) drive the winds and the water cycle.

Atmospheric conditions not only reduce the quantity of insolation reaching the Earth's surface but also affect the quality of insolation by diffusing approximately 20% of the incoming light and altering its spectrum. After passing through the Earth's atmosphere approximately half the insolation is in the visible electromagnetic spectrum with the other half mostly in the infrared and ultraviolet spectrum.

Upon reaching the surface, insolation is absorbed by the oceans, earth and plants. The energy captured in the oceans drives the thermohaline cycle. As such, solar energy is ultimately responsible for temperature driven ocean currents such as the thermohaline cycle and wind driven currents such as the Gulf Stream. The energy absorbed by the earth in conjunction with that recycled by the Greenhouse effect warms the surface to an average temperature of approximately 33°C. The solar energy captured by plants and other phototrophs is converted to chemical energy via photosynthesis. All the food we eat, wood we build with and fossil fuels we use are products of photosynthesis.

The flows and stores of solar energy are very large relative to human needs.

• The total solar energy available to the earth is approximately 3850 zettajoules (ZJ) per year.
• Oceans absorb approximately 285 ZJ of solar energy per year.
• Winds can theoretically supply 6 ZJ of energy per year.
• Biomass captures approximately 1.8 ZJ of solar energy per year.
• Worldwide energy consumption was 0.471 ZJ in 2004.

The map on the right (top) shows how solar radiation at the top of the earth's atmosphere varies with latitude. The bottom map shows annual average ground level insolation. For example, in North America the average insolation at ground level over an entire year (including nights and periods of cloudy weather) lies between 125 and 375 W/m² (3 to 9 kWh/m²/day). At present, photovoltaic panels typically convert about 15% of incident sunlight into electricity; therefore, a solar panel in the contiguous United States on average delivers 19 to 56 W/m² or 0.45 - 1.35 kWh/m²/day.

Types of technologies

Many technologies use solar energy. Some classifications of solar technology are active, passive, direct and indirect.

• Active solar systems use electrical and mechanical components such as tracking mechanisms, pumps and fans to process sunlight into usable outputs such as heating, lighting or electricity.
• Passive solar systems use non-mechanical techniques of capturing, converting and distributing sunlight into usable outputs such as heating, lighting or ventilation. These techniques include selecting materials with favorable thermal properties, designing spaces that naturally circulate air and referencing the position of a building to the sun.
• Direct solar generally refers to technologies or effects that involve a single conversion of sunlight which results in a usable form of energy.
• Indirect solar generally refers to technologies or effects that involves multiple transformations of sunlight which result in a usable form of energy.

Architecture

The Zion National Park Visitor's Center incorporates several aspects of solar design.

Main article: Passive solar building design

Solar architecture uses the sun for temperature control, lighting and ventilation while minimizing negative effects such as overheating and glare. The basic elements of solar architecture are building orientation, proportion, thermal mass and window placement.

• The entire building can be positioned and angled to be oriented towards or away from the sun, overshadowing from other structures or natural features can be avoided or used, and the building can be set into the ground using earth sheltering techniques.
• As a rule of thumb, a solar building's axis should run lengthwise east to west and the structure should be twice as long as wide.
• Windows facing the equator should be equal to 5-7% of the building's floor space. If heating is a concern, window area facing away from the equator should be minimized.
• The thermal mass in the building should be sized to smooth out temperature swings.
• Spaces can be designed to naturally circulate air. Cooling elements such as a solar chimney can be incorporated to help with ventillation.
• Lighting quality and energy use are strongly influenced by window design. In cold climates insulated glazing with low-emissivity coatings can maximize solar gain and reduce heat losses by 30-50%. In hot climates low-emissivity coatings on the outside of window panes can be used to reduce and control solar gain.

Lighting

Main articles: Daylighting and Light tube

The history of lighting is dominated by the use of natural light. The Romans recognized the Right to Light as early as the 6th century and English law echoed these judgements with the Prescription Act of 1832. It wasn't until the 1900s that artificial lighting took over as the main source of interior illumination. The 1973 oil and 1979 energy crises brought attention to conservation measures such as natural lighting but interest waned on both occasions with the restoration of energy supplies. Approximately 20% of the electricity used in the United States is for lighting. When daylighting techniques are appropriately applied natural light can supply interior lighting for many hours of the day.

Daylighting is a passive solar method of using sunlight to provide illumination. Daylighting directly offsets energy use in electric lighting systems and indirectly offsets energy use through a reduction in cooling load. Although difficult to quantify, the use of natural lighting also offers physiological and psychological benefits compared to artificial lighting.

Daylighting features include building orientation, window orientation, exterior shading, sawtooth roofs, clerestory windows, light shelves, skylights and light tubes. These features may be incorporated in existing structures but are most effective when integrated in a solar design package which accounts for factors such as glare, heat gain, heat loss and time-of-use. Architectural trends increasingly recognize daylighting as a cornerstone of sustainable design.

Hybrid solar lighting (HSL) is an active solar method of using sunlight to provide illumination. Hybrid solar lighting systems collect sunlight using focusing mirrors that track the sun. The collected light is transmitted via optical fibers into a building's interior to supplement conventional lighting. In single story applications, these systems are able to transmit 50% of received direct sunlight.

Daylight saving time (DST) utilizes solar energy by matching available sunlight to the time of the day in which it is most useful.

Water heating

Solar water heaters, on a rooftop in Jerusalem, Israel

Main articles: Solar hot water, Solar combisystem, and Solar pond

Solar hot water systems use sunlight to heat water. Commercial solar water heaters began appearing in the United States in the 1890s. These systems saw increasing use until the 1920s but were thereafter gradually replaced by relatively cheap and more reliable conventional heating fuels. The economic advantage of conventional heating fuels has varied over time resulting in periodic interest in solar hot water; however, solar hot water technologies have yet to show the sustained momentum they lost in the 1920s. That being said, the recent price spikes and erratic availability of conventional fuels is renewing interest in solar heating technologies.

As of 2005, the total installed capacity of solar hot water systems is 88 GWth and growth is 14% per year. China is the world leader in the deployment of solar hot water systems with 80% of the market. Israel is the per capita leader in the use of solar hot water with 90% of homes using this technology.In the United States heating swimming pools is the most successful application of solar hot water.

Solar water heating is highly efficient (up to 86%) and is particularly appropriate for low temperature (25-65 °C) applications such as domestic hot water, heating swimming pools and space heating.

The basic components of a solar water heating systems are solar thermal collectors, a storage tank and a circulation loop. The three basic classifications of solar water heaters are:

• Batch systems which consist of a tank that is directly heated by sunlight. These are the oldest and simplest solar water heater designs, however; the exposed tank can be vulnerable to cooldown.
• Active systems which use pumps to circulate water or a heat transfer fluid.
• Passive systems which circulate water or a heat transfer fluid by natural circulation. These are also called thermosiphon systems.

Solar water heaters are also classified by the type of circulation loop used to transmit and deliver heat. These can be direct or indirect.

• Direct solar hot water systems use a single loop to heat and deliver hot water.
• Indirect solar hot water systems use a primary loop to capture heat, a heat exchanger and a secondary loop to deliver hot water.

A solar pond is a pool of salt water that collects and stores solar energy. Solar ponds were first proposed by Dr. Rudolph Bloch in 1948 after coming across reports of a lake in Hungry in which the temperature increased with depth. This effect was due to salts in the lake's waters which created a "density gradient" that prevented convection currents. A prototype was constructed in 1958 on the shores of the Dead Sea near Jerusalem. The pond consisted of layers of water that successively increased from a weak salt solution at the top to a high salt solution at the bottom. This solar pond was capable of producing temperatures of 90 °C in its bottom layer and had an estimated solar to electric efficiency of 2%. Current, representatives of this technology include a 150 KW pond in En Boqeq, Israel, and another used for industrial process heat at the University of Texas El Paso.

Heating, cooling and ventilation

Main articles: Solar heating, Thermal mass, Trombe wall, and Solar chimney

• A thermal mass is a body that absorbs and holds heat. In the context of solar energy, it is a mass designed to store heat during sunny periods and release heat when sunlight levels are reduced or unavailable. A properly sized thermal mass will smooth out temperature swings and help keep rooms at a comfortable temperature throughout the day and night.

• A Trombe wall is a passive solar heating and ventilation system consisting of an air channel sandwiched between a window and a sun-facing thermal mass. During the ventilation cycle sunlight stores heat in the thermal mass and warms the air channel causing circulation through vents at the top and bottom of the wall. During the heating cycle the Trombe wall radiates stored heat.

• A transpired collector is a perforated sun-facing wall. The wall absorbs sunlight and pre-heats air as much as 22°C as it is drawn into the ventilation system. These systems are highly efficient (up to 80%) and can pay for themselves within 3-12 years in offset heating costs.

• Solar cooling can be achieved via absorption refrigeration cycles, desiccant cycles and solar mechanical processes. In 1878 Auguste Mouchout pioneered solar cooling by making ice using a solar steam engine attached to a refrigeration device.

• A solar chimney (or thermal chimney) is a passive solar ventilation system composed of a hollow thermal mass connecting the inside and outside of a building. As the chimney warms the air inside is heated causing an updraft which enhances the natural stack ventilation through a building. These systems have been in use since Roman times and are common in the Middle east.

Photovoltaics

File:Bp-solarmodul.JPG

Photovoltaic (PV) modules are composed of multiple PV cells. Two or more interconnected PV modules create an array.

Map of solar electricity potential in Europe

Main article: Photovoltaics

Solar cells, also referred to as photovoltaic cells, are devices or banks of devices that use the photovoltaic effect of semiconductors to generate electricity directly from sunlight. Until recently, their use has been limited because of high manufacturing costs. One cost effective use has been in very low-power devices such as calculators with LCDs. Another use has been in remote applications such as roadside emergency telephones, remote sensing, cathodic protection of pipe lines, and limited "off grid" home power applications. A third use has been in powering orbiting satellites and spacecraft.

To take advantage of the incoming electromagnetic radiation from the sun, solar panels can be attached to each house or building. The panels should be mounted perpendicular to the arc of the sun to maximize usefulness. The easiest way to use this electricity is by connecting the solar panels to a grid tie inverter. However, these solar panels may also be used to charge batteries or other energy storage device. Solar panels produce more power during summer months because they receive more sunlight.

Total peak power of installed PV is around 6,000 MW as of the end of 2006. Installed PV is projected to increase to over 9,000 MW in 2007. This is only one part of solar-generated electric power.

Declining manufacturing costs (dropping at 3 to 5% a year in recent years) are expanding the range of cost-effective uses. The average lowest retail cost of a large photovoltaic array declined from $7.50 to $4 per watt between 1990 and 2005. With many jurisdictions now giving tax and rebate incentives, solar electric power can now pay for itself in five to ten years in many places. "Grid-connected" systems - those systems that use an inverter to connect to the utility grid instead of relying on batteries - now make up the largest part of the market.

In 2003, worldwide production of solar cells increased by 32%. Between 2000 and 2004, the increase in worldwide solar energy capacity was an annualized 60%. 2005 was expected to see large growth again, but shortages of refined silicon have been hampering production worldwide since late 2004. Analysts have predicted similar supply problems for 2006 and 2007.

Solar power plants

Solar Two power tower surrounded by a field of heliostats.

Parabolic dishes use Stirling engines for power conversion.

Main articles: Solar thermal energy, Parabolic trough, Solar power tower, Photovoltaic power stations, Solar power plants in the Mojave Desert, and List of solar thermal power stations

Solar power plants use a variety of methods to collect sunlight and convert this energy into electricity, distill water or provide heat for industrial processes. Concentrating solar thermal power plants have traditionally been the most common type of solar power plant; however, multi-megawatt photovoltaic sites have seen recent rapid deployment.

Concentrating Solar Thermal (CST) systems use lenses or mirrors and tracking systems to focus a large area of sunlight into a small beam. CST technologies require direct insolation to perform properly. This requirement makes them inappropriate for significantly overcast locations.

The three basic CST technologies are the solar trough, solar power tower and parabolic dish. Each technology is capable of producing high temperatures and correspondingly high thermodynamic efficiencies but they vary in the way they track the sun and focus light.

• Line focus/Single-axis
  • A solar trough consists of a linear parabolic reflector which concentrates light on a receiver positioned along the reflector's focal line. These systems use single-axis tracking to follow the sun. A working fluid (oil, water) flows through the receiver and is heated up to 400 °C before transferring its heat to a distillation or power generation system. Trough systems are the most developed CST technology. The Solar Electric Generating System (SEGS) plants in California and Plataforma Solar de Almería's SSPS-DCS plant in Spain are representatives of this technology.
• Point focus/Dual-axis
  • A power tower consists of an array of flat reflectors (heliostats) which concentrate light on a central receiver located on a tower. These systems use dual-axis tracking to follow the sun. A working fluid (air, water, molten salt) flows through the receiver where it is heated up to 1000 °C before transferring its heat to a power generation or energy storage system. Power towers are less advanced than trough systems but they offer higher efficiency and energy storage capability. The Solar Two in Daggett, California and the Planta Solar 10 (PS10) in Sanlucar la Mayor, Spain are representatives of this technology.
  • A parabolic dish or dish/engine system consists of a stand-alone parabolic reflector which concentrates light on a receiver positioned at the reflector's focal point. These systems use dual-axis tracking to follow the sun. A working fluid (hydrogen, helium, air, water) flows through the receiver where it is heated up to 1500 °C before transferring its heat to a sterling engine for power generation. Parabolic dish systems display the highest solar-to-electric efficiency among CST technologies and their modular nature offers scalability. The Stirling Energy Systems (SES) and Science Applications International Corporation (SAIC) dishes at UNLV and the Big Dish in Canberra, Australia are representatives of this technology.

A solar updraft tower (also known as a solar chimney or solar tower) consists of a large greenhouse which funnels into a central tower. As sunlight shines on the greenhouse the air inside is heated and expands. The expanding air flows toward the central tower where a turbine converts the air flow into electricity. A 50 kW prototype was constructed in Ciudad Real, Spain and operated for eight years before decommissioning in 1989.

Cooking

Solar Cookers use sunshine as a source of heat for cooking as an alternative to fire.

Main article: Solar cooker

Solar cookers (or solar ovens) use sunlight for cooking, drying and pasteurization. Solar cookers offset fuel costs and reduce demand for local firewood. Solar cookers also improve local air quality by removing a source of smoke. The most common designs are box cookers, concentrating cookers and panel cookers.

• Solar box cookers consist of an insulated container with a transparent lid. Horace de Saussure developed this design in 1767 after observing: "It is a known fact, and a fact that has probably been known for a long time, that a room, a carriage, or any other place is hotter when the rays of the sun pass through glass." These cookers can be effectively used with partially overcast skies and can typically reach temperatures of 50-100°C. These are the cheapest and most widely used cooker design.

• Concentrating solar cookers use a parabolic reflector to concentrate light on a container positioned at the reflector's focal point. These designs cook faster and at higher temperatures (up to 315°C). As with other concentrating technologies these cookers require direct light and must be repositioned to track the sun.

• Solar Panel cookers (SPC) use flat reflectors to concentrate sunlight on a container within a transparent covering. Roger Bernard is credited with introducing panel cookers in 1994. This design uses partial concentration and will maintain effective operation with limited repositioning.

Solar chemical

Solar chemical processes convert solar energy into chemical energy. These processes use both light (photochemical) and heat (endothermic) to drive chemical, thermochemical or thermoelectric reactions. Solar chemical reactions can be used to store solar energy or replace energy that would otherwise be required from an alternate source.

Electrochemical cells, commonly known as batteries, convert electrical energy into chemical energy. Solar energy can indirectly be converted into chemical energy in a system involving a photovoltaic to electrochemical cell exchange. A more direct approach involves the use of photoelectrochemical cells which use light to produce hydrogen in a process similar to the electrolysis of water. A third approach involves the use of thermoelectic devices which convert a temperature difference between dissimilar metals into an electric current between those metals. This current can be use to produce hydrogen and oxygen through the electrolysis of water. The solar pioneer Mochout envisioned using the thermoelectric effect to store solar energy for later use during darkness; however, his experiments toward this end never progressed beyond primitive devices.

Solar energy can also be stored thermochemically with phase change materials (PCM). Devices of this type which store latent heat can be thought of as heat batteries. Phase change materials are classified as organic (paraffins, fatty acids) and inorganic (salts, metals,alloys).

• A Paraffin wax thermal storage system consists of a solar hot water loop connected to a paraffin wax tank. During the storage cycle, hot water flows through the storage tank melting the paraffin wax. The enthalpy of fusion for paraffin wax is 210-230 kJ/kg. During the heating cycle, stored heat is extracted from the tank as the wax resolidifies. These systems heat air and water up to 64°C and can reduce conventional energy use by 50%-70%.

• Eutectic salts such as Glauber's salt can also be employed in thermal storage systems. Glauber's salt are relatively inexpensive and readily available and can store 347 kJ/kg and deliver heat at 64°C. The Dover house in Dover, Massachusetts was the first to use a Glauber's salt heating system in 1948.

San Francisco Bay salt ponds

Solar energy at relatively low temperatures can be used in the production of minerals such as salt and potash.

• Salt evaporation ponds are shallow man-made ponds designed to produce salt from sea water. The seawater is fed into large ponds and water is drawn out through natural evaporation which allows the salt to be subsequently harvested. The ponds also provide a productive resting and feeding ground for more than 70 species of waterbirds, including several endangered species. The ponds are commonly separated by levees. Due to variable algal concentrations, vivid colors, from pale green to bright red, are created in the evaporation ponds. The color indicates the salinity of the ponds. Micro-organisms change their hues as the salinity of the pond increases. In low to mid-salinity ponds, green algae are predominant. In middle to high salinity ponds, an algae called Dunaliella salina shifts the color to red. Millions of tiny brine shrimp create an orange cast in mid-salinity ponds. Other bacteria such as Stichococcus also contribute tints. These colors are especially interesting to airplane passengers or astronauts passing above due to their somewhat artistic formations of shape and color.

Concentrating solar thermal technologies can be used to drive high temperature chemical processes.

• Ammonia can be decomposed into nitrogen and hydrogen at high temperatures (650-700°C). The stored gases can be subsequently recombined to generate heat or electricity via a fuel cell. A prototype system was constructed at the Australian National University.

• Zinc Oxide (ZnO) can be decomposed at high temperatures (1200-1750°C). The resulting pure zinc can be marketed directly. Alternatively, the zinc can be reacted with water at (350°C) to produce ZnO and hydrogen.

• Water can be directly dissociated at high temperatures (2300-2600°C). These process have so far been limited due to their high level of complexity and low solar to hydrogen efficiency (1-2%). An alternate path of research is investigating solar thermochemical cycles that can be used to dissociate water at lower temperatures. Thermochemical cycles are currently at the prototype stage.

• Concentrating solar thermal has also been investigated as a direct thermal method of producing aluminum.

While not a technology, photosynthesis is arguably the most important photochemical interaction. A diverse biology has developed capable of photosynthesizing light in the visible, ultraviolet, near infrared and far infrared regions of the electromagnetic spectrum.

Solar vehicles

The solar powered car The Nuna 3 built by the Dutch Nuna team

Helios UAV in flight

Main articles: Helios Prototype, Electric boat, and Solar balloon

Development of a practical solar powered car has been an engineering goal for 20 years. The center of this development is the World Solar Challenge, a biannual solar powered car race over 3021 km (1877mi) through central Australia from Darwin to Adelaide. The race's stated objective is to promote research into solar-powered cars. Teams from universities and enterprises participate. In 1987 when it was founded, the winner's average speed was 67 km/h (42 mph). By the 2005 race this had increased to an average speed of greater than 100 km/h (62 mph), even though the cars were faced with the 110 km/h (68 mph) South Australia speed limit.

Helios, named after the Greek sun god of the same name, was a prototype solar powered unmanned aircraft. AeroVironment, Inc. developed the vehicle under NASA's Environmental Research Aircraft and Sensor Technology (ERAST) program.

On 13 August, 2001, it set an unofficial world record for sustained altitude by a winged aircraft. It sustained flight at above 96,000 feet (29,250 m) for forty minutes, and at one time it flew as high as 96,863 feet (29,524 m). Later, in June 2003, the prototype broke up and fell into the Pacific Ocean about ten miles (16 km) west of the Hawaiian Island Kauai.

The first practical solar boat was probably constructed in 1975 in England (see Electrical Review Vol 201 No 7 12 August 1977). By 1995 passenger boats began appearing and are now used extensively.[14] Solar powered boats have advanced sufficiently to cross the Atlantic. The first crossing of the Atlantic Ocean was achieved in the winter of 2006/2007 by the solar catamaran sun21.[15]

A solar balloon is a black balloon that is filled with air. As sunlight shines on the balloon the air inside is heated and expands. This causes an upward buoyancy force. As such, the balloon functions like a hot air balloon. Some solar balloons are large enough for human flight but usage at the moment is restricted to the toy market.

Desalination and disinfection

Main articles: desalination, Solar still, and Solar water disinfection

Solar still built into a pit in the ground

A solar still uses solar energy to distill water. A few basic types of solar stills are cone shaped, boxlike, and pit. For cone solar stills, impure water is inserted into the container, where it is evaporated by the sun through clear plastic. The pure water vapor condenses on top and drips down to the side, where it is collected and removed. The most sophisticated of these are the box shaped types. The least sophisticated are the pit types.

Solar water disinfection (SODIS) is a method of disinfecting water using sunlight. The basic process involves filling a clear container 3/4 with water, shaking the container vigorously for 20 seconds, topping off the container and placing it in the sun. Shaking the container allows for the water to become aerated which amplifies the disinfecting effect of the sunlight. SODIS methods treat water through three synergistic radiation mechanisms.

• UV-A (wavelength 320-400nm) which react with oxygen dissolved in the water produces highly reactive forms of oxygen (oxygen free radicals and hydrogen peroxides) in the water. These reactive forms of oxygen kill the microorganisms.
• UV-A also interferes with the reproduction cycle of bacteria by damaging their DNA
• Infrared heating the water. If the water temperatures raises above 50°C, the disinfection process is three times faster.

Energy storage

Main article: Grid energy storage

A Solar powered garden lamp

Solar energy is primarily stored in the form of heat in hot water and thermal masses or chemical energy in batteries. The storage of excess solar energy allows for the availability of this energy during hours of darkness or cloud cover.

• Using traditional batteries
• Thermal mass
• Thermochemical storage (heat batteries)
• Molten salt

Storage always has an extra stage of energy conversion, with consequent energy losses, increasing the total capital costs. One way around this is to export excess power to the power grid, drawing it back when needed. This appears to use the power grid as a battery but in fact is relying on conventional energy production through the grid during the night. However, since the grid always has a positive outflow, the result is exactly the same.

Electric power costs are highly dependent on the consumption per time of day, since plants must be built for peak power (not average power). Expensive gas-fired "peaking generators" must be used when base capacity is insufficient. Fortunately for solar, solar capacity parallels energy demand; since much of the electricity is for removing heat produced by too much solar energy (using conditioners). This is less true in the winter when the peak energy use is in the early evening when food is being prepared and lighting, heating, and entertainment equipment loads are higher. Winter heating loads can be time shifted by storing thermal energy in bulk materials such as rock, water, or thermal phase transition materials such as glauber's salt or wax, provided solar illumination is sufficient. Wind power complements solar power since it can produce energy when there is no sunlight but this advantage is highly dependant upon local and seasonal wind availability.

Solar power by country

See the articles for individual countries listed at Category:Solar power by country

Development, deployment and economics

Main article: Deployment of solar power to energy grids

Solar energy is in general not economically competitive compared to fossil fuels. Other than market forces, solar industry needs government sponsorship to help generate enough momentum in the solar market. The following trends are a few examples by which the solar market is being helped to attain critical mass so that it becomes competitively sustainable :

• Government grants for research in solar technology to make the production cheaper and generation more efficient.

• Many countries and states have implemented incentives to encourage consumers to consider solar power. Examples include government tax subsidies, partial copayment schemes and various rebates over purchase costs of solar devices. These are meant to relieve some pressure off the consumer and entice them not to fear the high initial deployment investments.

• Adoption of an energy policy where the consumer can connect their local solar power generators to the local grid, and reverse feed the grid with the unconsumed extra power. The state power authority guarantees an attractive purchase price for the power that is reverse metered. This has been especially popular in Germany and Japan.

• Development of solar loan programs, with attractive return rates, to buffer the initial deployment costs and entice consumers to consider and purchase solar PV systems. The most famous example is the solar loan program sponsored by UNEP helping 100000 people finance solar power systems in India. Success in India's solar program has led to similar projects in other parts of developing world like Tunisia, Morocco, Indonesia and Mexico.

Photovoltaics is gaining credence among private investors as having the potential to grow into the next big industry. Many companies and venture capitalists are investing in photovoltaic development and manufacturing. This trend is particularly visible in Silicon valley, California. Nanotechnology manufacturing using CIGS solar cells promises to produce electricity at a cost of around 5¢/kwh and sell for $ 0.36 per peak watt, approximately 10 times less than average 2007 prices for solar panels.

Deployment of solar power depends largely upon local conditions and requirements. All industrialised nations share a need for electricity and it is believed that solar power will increasingly be used as an option for electricity supply. The Very Large Scale Photovoltaic Power Generation (VLS-PV) proposal argues that "PV systems could generate many times the current primary global energy supply". To compensate for night time energy demands they would need to be complemented with pumped storage.

Solar energy associations

• ISES: International Solar Energy Society International NGO supporting renewable and sustainable technologies.
• ASES: American Solar Energy Association US organization supporting solar energy, efficiency and sustainable technologies.
• SEIA: Solar Energy Industries Association US trade association of solar energy manufacturers, dealers, distributors, contractors
• Canadian Solar industry Association
• See also: Photovoltiac Industry Associations

Solar energy research institutes

There are many research institutions and departments at universities around the world who are active in solar energy research. Countries which are particularly active include Germany, Spain, Japan, Israel, Australia, China, and the USA.

• National Renewable Energy Laboratory NREL
• Centre for Renewable Energy Systems Technology, at Loughborough University
• Centre for Sustainable Energy Systems at the Australian National University
• Florida Solar Energy Center
• Solar Energy Laboratory at UW Madison
• See also: Photovoltaics research institutes

See also

• 1973 energy crisis
• Absorption (electromagnetic radiation)
• COMES, French Solar Energy Authority
• Deployment of solar power to energy grids
• Energy crisis
• Energy development
• Energy storage
• Energy: world resources and consumption
• European Union Climate Change Programme
• Future energy development
• Green electricity
• Global dimming
• List of conservation topics
• Microgeneration
• Photoelectric effect
• Photovoltaics
• Renewable energy
• Solar air conditioning
• Solar balloon
• Solar car
• Solar cell
• Solar heating
• Solar gain
• Solar ponds
• Solar power plants in the Mojave Desert
• Solar power satellite
• Solar power tower
• Solar radiation
• Solar thermal energy
• Solar tracker
• Solar updraft tower
• Sustainable design
• Timeline of solar energy
• Trans-Mediterranean Renewable Energy Cooperation (TREC)

External links

• White Paper Discussing the use of Carbon Finance to Develop Solar Power.
• Florida Solar Innovators.
• Scientific calculation of sun exposure. (in French)
• Solar Power-Renewable energy resource.

• Find solar/calculator (US DOE/ASES/SEPA)
• American Solar Energy Society
• Solar energy on Hydrogenews