ISO 1
The template {{Expand}} has been deprecated since 26 December 2010, and is retained only for old revisions. If this page is a current revision, please remove the template.
 | This article needs additional citations for verification. (July 2009) |
International Standard ISO 1 specifies the standard reference temperature for geometrical product specification and verification to be 20 °C, which is equal to 293.15 K and 68 °F.[1] [clarification needed]
Due to thermal expansion, precision length measurements need to be made at (or converted to) a defined temperature. ISO 1 helps in comparing measurements by defining such a reference temperature. The reference temperature of 20 °C was adopted by the CIPM on 15 April 1931, and became ISO recommendation number 1 in 1951.[2] [clarification needed] It soon replaced worldwide other reference temperatures for length measurements that manufacturers of precision equipment had used before, including 0 °C, 62 °F, and 25 °C. Among the reasons for choosing 20 °C was that this was a comfortable and practical workshop temperature and that it resulted in an integer value on both the Celsius and Fahrenheit scales.
See also
References
- ^ International Standard ISO 1: Geometrical Product Specifications (GPS) – Standard reference temperature for geometrical product specification and verification. International Organization for Standardization, 2nd edition, 2002. (1st edition: 1975)
- ^ Ted Doiron: 20 °C—A Short History of the Standard Reference Temperature for Industrial Dimensional Measurements. Journal of Research of the National Institute of Standards and Technology, Vol. 112, No. 1, January-February 2007.
