Opel Senator

Opel Senator
Overview
Manufacturer	Opel
Production	1978–1993
Body and chassis
Class	Full-size luxury car
Body style	4-door saloon 3-door fastback coupé
Layout	FR layout
Related	Opel Monza Opel Rekord Opel Omega
Chronology
Predecessor	Opel Kapitän Opel Commodore (coupé replaced by Monza)
Successor	None

The Opel Senator was a large automobile, two generations of which were sold in Europe by Opel, from 1978 until 1993. A saloon, its first incarnation was also available with a fastback coupé body as the Opel Monza and Vauxhall Royale Coupe.

Through the international divisions of General Motors, it was also known in various markets as the Chevrolet Senator, Daewoo Imperial (in South Korea), Vauxhall Royale (until 1983) and Vauxhall Senator (which took the place of the Royale on Vauxhall models when the Opel brand was phased out from 1983).

The original Senator shared its platform with the smaller Opel Rekord, the latter being lengthened to make the Senator.

The later car, from 1987, shared its base with the Opel Omega, which was again lengthened to produce the Senator.

Senator A

Senator A / Monza A
Overview
Also called	Vauxhall Royale Vauxhall Royal Coupe Chevrolet Senator Vauxhall Senator
Production	1978–1986
Assembly	Germany
Body and chassis
Class	Full-size luxury car
Body style	4-door saloon 3-door fastback coupé
Layout	FR layout
Dimensions
Wheelbase	2,683 mm (105.6 in) (Senator) 2,668 mm (105.0 in) (Monza)
Length	4,839 mm (190.5 in) (Senator) 4,720 mm (185.8 in) (Monza)
Width	1,722 mm (67.8 in)
Height	1,415 mm (55.7 in) (Senator) 1,380 mm (54.3 in) (Monza)
Curb weight	1,640 kg (3,616 lb)
Chronology
Predecessor	Opel Admiral
Successor	Opel Senator B

The Senator A (the "A" being used for differentiation here, but not a marketed name) was a lengthened version of the Opel Rekord E, complemented by a three-door fastback coupé version on the same platform called the Opel Monza, which was planned as a successor for the Opel Commodore coupé.

Different market names

The Senator A and Monza were initially sold in the United Kingdom as the Vauxhall Royale (and Vauxhall Royale Coupé), because the Opel marque was not so well established, but they were also under their Opel names. The vehicle was also available in South Africa as the Chevrolet Senator until 1982, when it was re-badged as an Opel. All year models were available in Australia, as the Holden Commodore in Sedan and Wagon variants, though the Monza Coupe was not available. Local racing legend, Peter Brock, had plans to import, modify and market the Opel Monza Coupe as Holden Monza Coupe with the Holden 5 Litre V8 fitted, through his own HDT (Holden Dealer Team) business, but the plans eventually fell through. The Holden models, which were built locally, had different front, rear and interior treatments, with local drivetrain options, including Holden's 3.3 Inline 6 cyl, 4.2 Litre and 5.0 Litre V8 engine options. Holden still markets the Commodore, but on their own Zeta Platform, which the new Camaro is also based upon. Commodore has been Australia's best selling car for the past 16 years.

Engines

The engine range for the first phase of the model's life included the 2.0E, 2.5S (and later the fuel-injected E), the 2.8S and the new developed 3.0E, which had 180 PS (132 kW; 178 hp) and 248 N⋅m (183 lb⋅ft) with fuel injection. The 3-speed BorgWarner automatic transmission from the Commodore range needed to be modified to cope with the new and improved power outputs. Opel's own 4-speed manual transmission was not up to the job and, instead of putting in a more modern 5-speed manual gearbox, Opel turned to transmission producer Getrag, and installed their 264 4-speed manual gearbox in the early Monzas. This was soon replaced with the Getrag 240 for the 2.5 and 2.8 engines, and the Getrag 265 for the 3.0E; both 5-speed manual gearboxes.

The straight-six engines were all of the CIH (camshaft in head) same design earlier used in the Commodore models. The CIH configuration is originated from the 1,7 and 1,9 litre straight 4 engines that was first used in the Opel Kadett and Rekord models in 1966, and subsequently was an engine layout that stayed in the Opel cars up until 1993 (the last CIH engine factory mounted was a 2,4 litre straight 4 CIH used in the Opel Frontera).

With the 3.0 litre engine, the Monza was the fastest car Opel had built up until then, capable of speeds of 215 km/h (134 mph), and 0–100 km/h (0–62 mph) in 9.5 seconds.

1982 facelift

• 
  Opel Senator A1
  (1978–1982)
• 
  Opel Senator A2
  (1982–1986)
• 
  Opel Senator A2 rear
• 
  Opel Monza A2
  (1982–1986)

The original Senator and Monza were face-lifted in the end of 1982. In the UK, the Senator "A2" (as it is sometimes referred to) initially sold only as an Opel, before being re-badged for the UK (as a Vauxhall) in 1984. The A2 Monza was only sold as an Opel.

The facelifted car looked similar to its predecessor, with relatively minor changes: headlights increased in size, and chrome parts were changed to a matt black or colour-coded finish.

Interiors were improved, and engines changed. Now, straight-4 CIH 2.0E and 2.2E engines from the Rekord E2 were available. The 2.5E was given a new Bosch fuel injection system. The 2.8S was taken out of production, and the 3.0E and a new 3.0H engines were at the top of the range. The 3.0E received upgraded Bosch fuel injection.

Monza GSE

Opel Monza GSE

The last incarnation of the Monza was the GSE edition in 1983; basically the A2 car, but a high-specification model which had Recaro sports seats, digital LCD instruments, and an enhanced all-black interior. It also featured a large rear spoiler on the boot. Also GS/E models are equipped with a 40% limited slip differential, an addition that had to be ordered separately on earlier 3,0E cars when purchasing.

By the time the Senator was updated to the new Senator B, and the Monza canceled, 47,008 Monzas had been built. There was no direct Monza replacement, although the idea of a large Opel/Vauxhall sporting car was also seen in the Lotus Carlton / Lotus Omega saloon.

Variants

In the UK, a four-wheel drive conversion was available, engineered by Ferguson, who had previously provided similar modifications for the Jensen FF. These were used by British Forces Germany under the BRIXMIS (British Commanders'-in-Chief Mission to the Soviet Forces in Germany) operations for the collection of technical intelligence.

A limited edition convertible edition was also available in Germany, where the company "Keinath" reinforced the car heavily, and this added to the all round weight to the car. The Convertible edition is very rare, and are easily recognized by being an all white A2 model, with white or red leather interior.

German tuner and manufacturer Irmscher also made a special "irmscher" version of the Monza, and added small sideskirts and frontspoiler. The engine gained a considerable upgrade: The 3.0 engine got a reshaped crankshaft and different pistons and rods increasing the capacity to 3.6 litres. A remapped ECU was added to the Bosch injection system giving the car 206PS, and extra torque.

Other uses of the Monza name

This Monza should not be confused with the South African Opel Monza, which was a saloon version of the smaller Opel Kadett. To complicate things further, there also was a Chevrolet Monza in Brazil, which was a version of the 1981 German Opel Ascona but with a three-door fastback body not available anywhere else. There was also an unrelated Chevrolet Monza in the United States. In Venezuela, the Opel Senator A was sold as Chevrolet Monza, in sedan, and a hatchback, known as "Monza Hatch".

Senator B

Opel Senator B rear

Senator B
Overview
Also called	Vauxhall Senator
Production	1987–1993
Assembly	German
Body and chassis
Class	Full-size luxury car
Body style	4-door saloon/sedan
Layout	FR layout
Platform	GM V platform
Powertrain
Engine	Straight-6 2.5i L 25NE 2.6i L C26NE 3.0i L C30NE 3.0i L 24V C30SEJ Irmscher Straight-6 4.0i L C40SE
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2,730 mm (107.5 in)
Length	4,845 mm (190.7 in)
Width	1,785 mm (70.3 in)
Height	1,455 mm (57.3 in)
Curb weight	1,640 kg (3,616 lb)
Chronology
Predecessor	Opel Senator A
Successor	None

In Britain, the Senator B was marketed as the Vauxhall Senator

A new model, the Senator B (marketed without the "B" suffix), arrived in spring 1987, a long-wheelbase version of the Opel Omega. There was no Monza equivalent.

There were various versions of the Senator B: 12-valve 2.5 L and 3.0 L sized engines were released in 1987 along with a luxury "CD" model with the 3.0 L engine. The CD version boasted adjustable suspension, air conditioning, heated seats, trip computer and cruise control. The cars were available with either 5-speed manual or 4-speed automatic gearboxes. Senator as a luxury car had many options to chose among other were: leather seats, heated seats both front and rear, electronic air conditioning, LCD instrument cluster, BBS sourced multispoke alloy wheels.

A 24-valve 3.0 L was introduced in 1989, generating 204 PS (150 kW; 201 hp) (compared with 177 PS (130 kW; 175 hp) for the older 12-valve version). This model was very popular with the police force in the UK, with several cars being supplied to upgraded police specification. The main feature of the new engine was a "Dual Ram" system, increasing torque at low engine speeds by means of a redirected air flow system engaged at 4,000 rpm.

Later in the model's lifespan, the 2.5 L was replaced by a 2.6 L Dual Ram, and the 3.0 L 12-valve was deleted in 1992. CD versions of the 2.6 L and 24-valve 3.0 L were available up to the model's withdrawal in 1993.

When the second-generation Omega was released in 1994, Opel considered that it was sufficiently represented in the upper end of the market by the top-specification Omega Elite. Consequently, the Senator was cancelled in May 1993 and not directly replaced.

Technical data of Opel Senator B (1987–1993)
Opel Senator	2.5 i 25NE	2.6 i C26NE	3.0 i C30NE	3.0 i C30SEJ	Irmscher 4.0 i C40SE
Engine:	I-6 – 12V			I-6 – 24V
Displacement:	2490 cc	2594 cc	2969 cc		3983 cc
bore x Stroke:	87 x 69,8 mm	88,8 x 69,8 mm	95 x 69,8 mm		98 x 88 mm
Max power @ rpm:	140 PS (103 kW) @ 5200	150 PS (110 kW)@ 5600	156 PS (115 kW) @ 5400 177 PS (130 kW) @ 5800	204 PS (150 kW) @ 6000	272 PS (200 kW) @ 5800
Max torque @ rpm:	201 N⋅m (148 lb⋅ft) @ 4000	216 N⋅m (159 lb⋅ft) @ 3600	200 N⋅m (148 lb⋅ft) @ 3900 235 N⋅m (173 lb⋅ft) @ 4400	265 N⋅m (195 lb⋅ft) @ 3600	387 N⋅m (285 lb⋅ft) @ 3300
Injection:	Multipoint (Bosch LE-Jetronic)		Multipoint (Bosch Motronic)
Cooling:	water
Transmission:	4-sp automatic, 5-sp manual				5-sp manual
Brakes:	Front: ventilated disc brakes Ø 280 mm, rear: ventilated disc brakes Ø 270 mm			Front: ventilated disc brakes Ø 296 mm, rear: disc brakes Ø 270 mm
Body structure:	Sheet steel, unibody construction
Track front/rear:	1462/1484 mm
Wheelbase:	2730 mm
Length:	4845 mm
Dry weight:	1440–1640 kg
Top speed:	210 km/h (130 mph)	215 km/h (134 mph)	225 km/h (140 mph)	240 km/h (149 mph)	255 km/h (158 mph)
0–100 km/h:	10.5 s	9.8 s	9 s	7.8 s	6.5 s
Fuel consupmtion:	13.0 l	12.5 l	13,0–13.5 l	12.5 l	14.5 l

External links

• Website about Opel Senator/Monza
• carpics – Opel Monza pictures