Diseconomies of scale
Diseconomies of scale are the forces that cause larger firms to produce goods and services at increased per-unit costs. They are less well known than what economists have long understood as "economies of scale", the forces which enable larger firms to produce goods and services at reduced per-unit costs. Perhaps the only research that focuses explicitly on the forces of corporate diseconomies of scale is Canbäck (2004) (PDF file).
Causes
Some of the forces which cause a diseconomy of scale are listed below.
Cost of communication
Ideally, all employees of a firm would have one-on-one communication with each other so they know exactly what the other workers are doing. A firm with a single worker does not require any communication between employees. A firm with two workers requires one communication channel, directly between those two workers. A firm with three workers requires three communication channels (between employees A & B, B & C, and A & C). Here is a chart of one-on-one communication channels required:
Workers Communication Channels ======= ====================== 1 0 2 1 3 3 4 6 5 10
The one-on-one channels of communication grow more rapidly than the number of workers, thus increasing the time, and therefore costs, of communication. At some point one-on-one communications between all workers becomes impractical, and only certain groups of employees will communicate with one another (salespeople with salespeople, production workers with production workers, etc.). This reduced communication slows, but doesn't stop, the increase in time and money with firm growth, but also costs additional money, due to duplication of effort, owing to the reduced level of communication.
Duplication of effort
A firm with only one employee can't have any duplication of effort between employees. A firm with two employees could have duplication of efforts, but this is improbable, as the two are likely to know what each other is working on at all times. When firms grow to thousands of workers, it is inevitable that someone, or even a team, will take on a project that is already being handled by another person or team. General Motors, for example, developed two in-house CAD/CAM systems: CADANCE was designed by the Design Staff, while Fisher Graphics was created by the former Fisher Body division. These similar systems later needed to be combined into a single Corporate Graphics System, CGS, at great expense. A smaller firm would neither have had the money to allow such expensive parallel developments, or the lack of communication and cooperation which precipitated this event. In addition to CGS, GM also used CADAM, UNIGRAPHICS, CATIA and other off-the-shelf CAD/CAM systems, thus increasing the cost of translating designs from one system to another. This endeavor eventually became so unmanageable that they acquired Electronic Data Systems (EDS) in an effort to control the situation. A smaller firm would have chosen a single off-the shelf CAD/CAM system, with no need to combine or translate between systems.
Top-heavy companies
The more employees a firm has, the larger percentage of the workforce will be "management". A company with a single worker doesn't need any managers (this refers to managers of people, as opposed to managers of other resources). A firm with five employees might employ one as a manager and the other four as workers. If that manager does nothing other than manage the workers under them, then the productivity of the firm has been reduced by 20%. A firm with 21 employees might have 16 workers, 4 supervisors, and 1 manager. If neither the manager nor supervisors do anything but manage the people under them, then we now have reduced productivity by 5/21 or 23.8%. Thus, the larger the firm, the lower the percentage of "line workers". To be sure, companies with higher worker-to-manager ratios and that have "working managers" (who perform other important tasks in addition to managing the people under them) will have their productivity less negatively impacted by growth, but the effect is still there. Managers are necessary to manage a large, complex company, but should be considered a "necessary evil" as they also reduce overall productivity. Also note that higher level managers get higher level pay, often despite poor performance, and thus cost the company more than their numbers would indicate. For example, a company with 16 workers at $10/hr, 4 supervisors at $20/hr and 1 manager at $30/hr is spending $270/hr, $110/hr (41%) of which is on management.
"Office politics"
This will be defined as management behaviour which that manager knows is counter to the best interest of the company, but is in their personal best interest. For example, a manager might intentionally promote an incompetent worker knowing that that worker will never be able to compete for his or her job. This type of behavior only makes sense in a company with multiple levels of management. The more levels, the more opportunity for this. At a small company, such behavior would likely cause the company to go bankrupt, and thus cost the manager their job, so they would not make such a decision. At a large company, one bad manager more or less wouldn't have much effect on the overall health of the company, so such "office politics" are still in the interest of management.
Isolation of decision makers from results of their decisions
If a single person makes and sells donuts, and decides to try jalapeño flavoring, they would likely know that day whether their decision was good or not, based on the reaction of customers. A person at a huge company that makes donuts may not know for many months if such a decision worked out or not. By that time, they may very well have moved on to another division or company, and thus see no consequences from their decision. This lack of consequences can lead to poor decisions.
Slow response time
In a reverse example, the single worker donut firm will know immediately if people begin to request healthier offerings, like whole grain bagels, and be able to respond the next day. A large company would need to do research, create an assembly line, determine which distribution chains to use, plan an advertising campaign, etc., before any change could be made. By this time smaller competitors may well have grabbed that market niche.
Inertia (unwillingness to change)
This will be defined as the "we've always done it that way, so there's no need to ever change" attitude (see appeal to tradition). An old, successful company is far more likely to have this attitude than a new, struggling one. While "change for change's sake" is counter-productive, refusal to consider change, even when indicated, is toxic to any company, as inevitably changes in the industry and market conditions will demand changes in the firm, in order to remain successful.
Self-competition
A small firm only competes with other firms, but larger firms frequently find their own products are competing with each other. A Buick is just as likely to steal customers from another GM make, such as an Oldsmobile, as it is to steal customers from other companies. This may help to explain why Oldsmobiles were discontinued after 2004. This self-competition wastes resources that should be used to compete with other firms.
Large market share
A company with only 1% of the market share could easily double sales in a year. A company with 90% market share can't hope to do so well. They can spread into other markets or industries, but this means they will lose many of the economies of scale specific to the old market or industry.
Public and government opposition
Such opposition is largely a function of the size of the firm. Behavior from Microsoft, which would have been ignored from a smaller firm, was seen as an anti-competitive and monopolistic threat, due to Microsoft's size, thus bringing about public opposition and government lawsuits.
Other effects related to size
Large firms also tend to be old firms in mature markets. Both of these have negative implications for future growth, as well. Old firms tend to have a large retiree base, with high associated pension and health costs, and also tend to be unionized, with associated higher labor costs and lower productivity (due to increased vacation and sick time). Mature markets tend to only offer the potential for small, incremental growth. Everybody might go out and buy a new invention next year, but it is unlikely they will all buy cars next year, since most people already have them.
AND THEN ARIA HAD A BIG HUJCHE BOLLE:
Solutions
Solutions to the diseconomy of scale for large firms involve changing the company into one or more small firms. This can either happen by default when the company, in bankruptcy, sells off its profitable divisions and shuts down the rest, or can happen proactively, if the management is willing. Returning to the example of the donut firm, each retail location could be allowed to operate relatively autonomously from the company headquarters, with employee decisions (hiring, firing, promotions, wage scales, etc.) made by local management, not dictated by the corporation. Purchasing decisions could also be made independently, with each location allowed to choose its own suppliers, which may or may not be owned by the corporation (wherever they find the best quality and prices). Each locale would also have the option of either choosing their own recipes and doing their own marketing, or they may continue to rely on the corporation for those services. If the employees own a portion of the local business, they will also have more invested in its success. Note that all these changes will likely result in a substantial reduction in corporate headquarters staff and other support staff. For this reason, many businesses delay such a reorganization until it is too late to be effective.
Examples
The independently controlled donut firm locations may choose to offer higher wages and charge higher prices if they are in an affluent area. In October, when fresh apple cider is available at bargain prices from local farmers, they may choose to market a cinnamon donut/hot apple cider combo promotion. A single large, centrally controlled firm may lack the flexibility to offer such customizations.