Jump to content

Light pen

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by MacBerti (talk | contribs) at 12:25, 6 December 2017 (Gorilla arm link corrected). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Photo of the Hypertext Editing System (HES) console in use at Brown University, circa October 1969. The photo shows HES on an IBM 2250 Mod 4 display station, including lightpen and programmed function keyboard, channel coupled to Brown's IBM 360 mainframe.

A light pen is a computer input device in the form of a light-sensitive wand used in conjunction with a computer's CRT display.

It allows the user to point to displayed objects or draw on the screen in a similar way to a touchscreen but with greater positional accuracy. A light pen can work with any CRT-based display, but its ability to be used with LCDs was unclear (though Toshiba and Hitachi displayed a similar idea at the "Display 2006" show in Japan[1]).

A light pen detects a change of brightness of nearby screen pixels when scanned by cathode ray tube electron beam and communicates the timing of this event to the computer. Since a CRT scans the entire screen one pixel at a time, the computer can keep track of the expected time of scanning various locations on screen by the beam and infer the pen's position from the latest timestamp.

History

The first light pen was created around 1955 as part of the Whirlwind project at MIT.[2][3]

During the 1960s light pens were common on graphics terminals such as the IBM 2250, and were also available for the IBM 3270 text-only terminal.

Light pen usage was expanded in the early 1980s to personal computers such as the Fairlight CMI, and the BBC Micro. IBM PC compatible CGA, HGC and some EGA graphics cards also featured a connector for a light pen, as did early Tandy 1000 computers,[4] the Thomson MO5 computer family, the Atari 8-bit and Commodore 8-bit home computers.

Because the user was required to hold their arm in front of the screen for long periods of time (potentially causing "gorilla arm") or to use a desk that tilts the monitor, the light pen fell out of use as a general purpose input device.[citation needed]

See also

References

  1. ^ "Slashphone Article". 2006-04-20. Archived from the original on 2008-11-20. Retrieved 2008-11-12. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  2. ^ "A Critical History of Computer Graphics and Animation". Retrieved 2009-05-04.
  3. ^ "The Computer Desktop Encyclopedia (entry for Light Pen)". Retrieved 2009-05-04.
  4. ^ For example, the Tandy 1000 SX has a DE-9 light pen conector on the rear panel; on the later-introduced Tandy 1000 TX, this light pen interface has been replaced with a serial port using the same connector in the same location.