Jump to content

Hang (instrument)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by GotHang (talk | contribs) at 06:32, 23 May 2008. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Front line: prototype hang built in January 2000 (left), Ghatam (right); second line: Three Hanghang built in 2007, 2006 and 2005 (from the left to the right)
Three Hanghang built in 2007, 2006 and 2005 (from the left to the right)
Manu Delago playing the hang

A Hang [haŋ] (pronunciation between the vowel sounds in the word 'Hot' and 'Hungry') is a melodious percussive steel musical instrument created in Switzerland. It uses some of the same physical principles as a steel drum. That being said there has been much metallurgical and acoustic research by the makers which have led to significant changes in structure, design, and process. It was the result of many years of research on the steelpan and the study of the diverse collection of instruments from around the world, such as gongs, gamelan, ghatam, drums, bells, etc. Udu-like sounds can be produced with the Helmholtz resonance that can occur within the clamped shallow shells. It also has the capacity to ring like a singing bowl. The instrument has sometimes been referred to by owners and others as a hang drum, because it is often played like a drum, its relation to the steel drum, and its popularity with hand drummers. While this is true, there are other ways to coax sound out of a Hang that do not involve 'drumming'.

Playing the hang

The Hang is typically played resting on the player's lap, and can also be played on a stand. The Hang is generally played with the hands and fingers instead of mallets, so the sound is generally softer and 'warmer' than a Steel Pan. Depending on how it is played the notes can sound like a harp, bells, or harmonically tuned steelpans. Each 'Tone Field' has several overtones built into and around each fundamental note.

Creation and Development

The Hang was developed in 2000 in Berne, Switzerland by Felix Rohner and Sabina Schärer (PANArt Hangbau AG) and introduced at the Frankfurt Music Fair in 2001. Its name comes from the Bernese German word for hand. The two deep drawn steel hemispheres of the Hang are hardened by a process known as gas-nitriding. The side considered the 'bottom' has an opening (Gu) in the center which is the bass note. When it is played in a dampened way it can change in pitch similar to a talking drum. On the 'top' are seven (in the bass version of the Hang) or eight (treble version which is no longer produced) notes arranged in a 'Tone Circle' in zig-zag fashion from low to high. All are tuned harmonically around a low note (Ding) at the center of the Tone Circle.

There are only two people who make Hanghang (plural form of Hang), the inventors Felix Rohner and Sabina Schärer. They have a little workshop in Berne where every Hang in existence was created. From 2000 to 2005 the Hang was offered in multiple scales ranging from fifteen to up to forty five different 'Sound Models'. The center note (Ding) ranged from a E3 to A3 The Hang Makers took their initial inspiration from ethnomusicological roots with models such as the Aeolian, Ake Bono, Melog, Pygmy, and Zhi Diao.

In the spring of 2006 the Hang Makers presented a new generation of Hanghang. The new instruments (often referred to as 2nd Generation) have a surface coating of annealed brass over the nitrided steel as well as a ring of brass around the circumference of the Hang. From the many different scales the Hang Makers reduced to a more stable and consistent structure consisting of a lowered central note (Ding) at D3. Most New Generation models have two A notes (A3 and A4) as well as another D (D4) in the Tone Circle around the Ding. The remaining notes were mixed into several different configurations. Older Hanghang had tone fields with the oval indentation oriented radially towards the Ding, with the 2007 models (as well as the Integral Hang) the tone fields are angled at about 45° from a line drawn from the Ding to the edge shifting the overtone 'sweet spots' closer to the Ding. They also started marking the individual serial number on the inside of the Gu opening and signing each Hang at the outside edge of the Gu side of the Hang.

In the spring of 2008 the Hang Makers presented a new Hang referred to as the Integral Hang. Numbers began again with an H in front (H1, H2, etc.) and it appears the first were created in November of 2007. Several changes mark the Integral Hang. It now has only one scale (D3 Ding, A3, Bb3, C4, D4, E4, F4, A4). While the circumference remains a circle, the Gu side has been shaped very slightly as an oval from the spherical. Along with that shift, the Gu hole is now a subtly oval shape which creates two Gu ringing 'notes' - F and an F#. Significant changes have been made to the Ding (center note on the top). It now has a circular indentation in the dome and has a texture of brass applied, annealed, and then lacquered. The PANArt logo, serial number, date of finalization, and signatures of the Hang Makers are now on Gu side of the Hang near the equator where the two shells meet.

Obtaining a hang

In 2006 the Hang Makers stopped shipping instruments directly and halted sales through retailers. To obtain a Hang, prospective customers must now send a letter to request an instrument. Worldwide offers for used Hanghang are rare, and prices in Internet auctions have been exceptionally high due to an increased demand since 2006 and a reduction in supply due to changes in the manufacture and distribution of Hanghang. In 2007, purchasers were invited to Bern with an appointment time to select an instrument. With the distribution of the Integral Hang beginning in 2008, purchasers could choose between requesting an appointment in Bern or having their Integral Hang shipped to them.

References

Retrieved from "https://en.wikipedia.org/w/index.php?title=Hang_(instrument)&oldid=214368484"