M60 machine gun
| ||
| Caliber: | 7.62 × 51 mm NATO | |
| Firearm action: | Gas-operated, open bolt | |
| Barrel length: | 560 mm (22 in) | |
| Overall length: | 1,077 mm (42.4 in) | |
| Effective range: | 1,100 m (1,202 yd) | |
| Maximum range: | 3,725 m (4,075 yd) | |
| Cyclic rate of fire: | ~550 round/min | |
| Sustained ROF: | 100 round/min | |
| Muzzle velocity: | 853 m/s (2,800 ft/s) | |
| Weight, unloaded: | 10.5 kg (23.1 lb) | |
| Manufacturer: | Saco Defense, U.S. Ordnance | |
The M60 (also seen 'M-60', formally Machine Gun, 7.62mm, M60) is a family of American belt-fed machine guns firing the 7.62 × 51 mm NATO cartridge.
In the U.S. military, the M60 has largely been replaced by various versions of the M240 as a medium machine gun, and by the M249 SAW as a squad automatic weapon. However, it remains in use in every branch, as well as some other countries (another major user was Australia); it continues to be manufactured into the 21st century.
The M60 can be used in both offensive and defensive configurations. In the offense, it provides a higher rate of fire, greater effective range, and uses a larger caliber round than the standard-issue United States assault rifle, the M16. In defensive use, the long range, close defensive, and final protective fires delivered by the M60 form an integral part of a unit's battle plan.
The M60 is effective up to 1,100 meters when firing at an area target and mounted on a tripod; up to 800 meters when firing at an area target using the integral bipod; up to 600 meters when firing at a point target; and up to 200 meters when firing at a moving point target. United States Marine Corps doctrine holds that the M60 and other weapons in its class are capable of suppressive fire on area targets out to 1,500 meters if the gunner is sufficiently skilled.
The M60 is generally used as crew-served weapon, which means that it is usually operated by more than one soldier, in this case two — the gunner and an assistant. The gun's significant weight makes it difficult to carry and operate by a single soldier. In the modern United States Army Infantry, each soldier will typically carry the much lighter and smaller M16 rifle, while the entire squad will be served by a single, shared M60. The gunner carries the weapon while the assistant carries a spare barrel and extra ammunition in linked belts. The basic ammunition load carried by the crew is 600 to 900 rounds, which at the maximum rate of fire allows for approximately two minutes of continuous firing. In many U.S. units that used the M60 as a squad automatic weapon in Vietnam, every soldier in the rifle squad would carry at least 200 linked rounds of ammunition for the M60, a spare barrel, or both, in addition to his own weapon and equipment.
The designation is normally written without dashes (e.g. M60); however, 'M-60' can commonly be found even in government sources. M60 references either the first major version, or some member of the family. Other major versions are the M60E1 (an improved version that did not enter production), the M60E2 (a co-axial tank machine gun used on the M48A5 and later model M60 tanks), the M60E3 (a lightweight version) and the M60E4 (another improved version, designated Mk 43 Mod 0 by the U.S. Navy). The M60C was used on fix mounts on aircraft, and the M60D was primarily used as a door gun on helicopters. The M60E2 and M60D are used on the Type 88 K1 in co-axial and pintle-mounted configurations, respectively. There are many smaller variations among each type, between makers of the firearm, and over time.
History
The M60 machine gun began development in the late 1940s as a program for a new, lighter 7.62 mm machine gun. The design included features that had been successful on earlier designs, as well as improvements of its own. The gun first became widely known during the Vietnam War period and has appeared in numerous television shows and movies (perhaps the most well-known of these are the Rambo movies starring Sylvester Stallone). It was partially replaced by the M249 Squad Automatic Weapon starting in the 1980s in certain jobs, and was gradually replaced in the late 20th Century by the M240 machine gun (a variant of the FN MAG), which was adopted by the U.S. military from 1977, and entered service in the 1980s for vehicles and 1990s for infantry. The M240 is several pounds heavier than the M60, but it is highly regarded for its high reliability despite having a very complex gas system.
In Australia, the M60 was replaced by the F-89, a FN Minimi.
It drew on many common concepts in firearms manufacture, such as stamped sheet metal construction as on the Chauchat (the most produced machine gun of WWI), belt feed (as on the Browning M1919), a modified mechanism for belt feed from the MG42, fast barrel replacement (such as on the Czechoslovakian ZB 1930), and a pistol grip and stock. The M60s gas-operated is unique, and drew on technical advances of the period, but like most firearms drew on older designs. Its gas system drew in particular on the Lewis Gun's gas system [1]. It is commonly said to have drawn on the German FG42's gas system, though its likely this is the result of confusion with the T52 and T44, which were developed from the FG42, but were defeated by what would become the M60 in the trials for the new machine gun in the 1950s. The gas system was simpler than other gas systems, and likewise easier to clean.
The M60 was adopted by the U.S. Army officially in 1957, and is still in use (as of 2006). Its reputation varies widely, and often depends upon which version a person gained experience with, and when.
The M60 continued to be used as a door gun on U.S. Army helicopters into the 2000s, as the main 7.62 mm machine gun by some U.S. special operations forces into the late 1990s, and by U.S. Navy SEALs into the 2000s. As of 2005, it is used by the Coast Guard, Navy, and a number of reserve forces, though it is gradually being phased out in favor of the M240 7.62 mm medium machine gun. The weapon can still be found in use in the U.S. Army and special operations forces in other roles. The use as a Army helicopter door gun will soon be tapering off, as an improved M240 version has finally been adopted for this role in the later half of first 2000 decade.
Use of the M60 is tapering off over a long period, as the weapons in service slowly wear out (and then new weapons are bought) or when a new weapon is obtained for a given job. Also, subgroups that continue to use them may obtain funding to keep models in service. One unit might have received new M240s, only to give their M60s to a reserve unit, sometimes replacing an even older weapon. It also remains in use in other countries in a variety of roles. The M240 itself has been slated for eventual replacement under a program for a new lightweight 7.62 mm machine gun under Joint Service Small Arms Program (JSSAP).
Design
The M60 is a gas-operated, air-cooled, belt-fed, automatic machine gun that fires from the open-bolt position and is chambered for the 7.62 mm NATO cartridge. Ammunition is usually fed into the weapon from a 100-round bandolier containing a disintegrating, metallic split-link belt. As with all such weapons, it can be fired from the shoulder, hip, or underarm position. However, to achieve the maximum effective range, it is recommended that a bipod-steadied position or a tripod-mounted position be used and fired in bursts of 3–5 rounds. The weapon is heavy and difficult to aim when firing without support, though the weight helps reducing the felt recoil. The straight-line layout allowed the operating rod and buffer to run directly back into the buttstock and reduce the overall length of the weapon. The large grip also allowed the weapon to be conveniently carried at the hip. The gun can be stripped using a live round of ammunition as a tool.
The M60 is often used with its own integrated bipod or with the M122 tripod.
Design performance and criticisms
When tested in the field, the M60 was fairly effective, but in the jungles of Southeast Asia in which it was soon used, the initial versions displayed several potential problems when used on the ground. Some say that the most common complaint about the machine gun was its weight, but all belt-fed weapons of this type are rather heavy. The M60 was among the lightest 7.62 mm machine guns of the era, and lighter than the M240 that is slowly supplanting it.
From units in Vietnam, the single most common complaint was that the M60 was comparatively unreliable and prone to jamming and other malfunctions, especially when it was dirty (fine sand and dust in the mechanism could bring the M60 to a halt). This was a major factor in the Israeli Defense Force declining to adopt the M60. The weapon was also more difficult to clean and maintain than the M1918 Browning Automatic Rifle (BAR). The weapon in normal conditions would often fire thousands of rounds without a serious jam; however, it is the ability to operate in the field which is important. For those who maintained the weapon properly, it was effective enough; it remained in use on aircraft, ships, and special forces after being supplanted among regular infantry by the M249 and M240. The safety was awkward to operate and worked the "wrong way" for soldiers who were trained with the M16 rifle and M1911A1 pistol — that is, it required an upward movement of the thumb on the safety catch to make the gun ready to fire, rather than a downward movement as with the other weapons.
The M60 sometimes (depending on the version) tore rims off of fired cartridge cases during the extraction cycle, resulting in failure to remove the empty case, causing a jam that could take many minutes to clear. The barrel latch mechanism (a swinging lever) had a tendency to catch on the gunner's equipment and accidentally unlatch, causing the barrel to fall out of the gun. The lever was replaced with a pushbutton mechanism that was less likely to be accidentally released, but many of the swinging-lever latches are still on guns in inventory, forty years after this problem was discovered. The grip/trigger housing assembly is held in place with a rather fragile leaf spring clip instead of the captive pins used in other designs. The spring clip has been known to be prone to breakage since the first trials at Aberdeen Proving Ground. Duct tape and cable ties have been seen on M60s in the field, placed there by their crews in case the spring clip breaks.
Several critical parts of early production M60s, such as the receiver cover and feed tray, were made from very thin sheet metal stampings and prone to bending or breaking; sturdier parts were eventually available in the early 1970s. Early M60s also had driving spring guides and operating rods that were too thin and gas pistons that were too narrow behind the piston head (part of an attempt to save weight), leading to problems with breakage. Metallurgical problems also played a part, (blamed by some on low-bid contractors), but after 1970 a slightly heavier part was designed and slowly put into the supply chain.
Another criticism with some versions of the M60 is that the barrel, removable as with most machine gun barrels, had the bipod attached to it, instead of being attached to the gas chamber or barrel shield. This had some advantages but made replacement barrels heavier.
U.S. Marines especially disliked the M60 and many Marine units held onto their BARs until 1967-68 officially, and longer than that unofficially. The M60E3 variant was designed in the mid-1980s for the U.S. Marine Corps, with a reduction in weight to 18.9 lb (8.61 kg) and a slight improvement in reliability. However, users complained about the quickly-overheating barrel, which had been a problem with the original M60. This problem was aggravated in the M60E3, as the lighter barrel required changing every 100 rounds instead of every 200. However, the M60E3's barrel has a wire and plastic handle near the breech end and can theoretically be changed safely without the use of heat-resistant mittens.
In 1991, the Belgian-designed FN MAG machine gun, designated the M240 in U.S. service, was adopted by the Marines as the M240G as a replacement for M60s used by infantry, though the M240 had already been used as a co-axial and pintle-mounted machine gun since the 1980s by the USMC. The M240 was first adopted in 1977 by the Army as a co-axial machine gun. The Army adopted the M240B for infantry in the mid-90s, and other branches of the military adopted various versions at different points in time. As of 2006, the M60 continues to be fielded to some degree by all branches of the U.S. military, in addition to Reserve and National Guard units. This includes front line service with some U.S. special forces and as a helicopter door gun. The Navy also continues to use various versions in a variety of jobs. It is scheduled to be replaced as in the door gun role by the new M240H. As mentioned, remaining M60s and the M240 are both planned to be replaced by a new lightweight 7.62 mm machine gun.
Ammunition
The M60 family of weapons are capable of firing many different kinds of ammunition. Most common among them are the M61 Armor piercing, the M62 Tracer, the M80 Ball, the M63 Dummy, and the M82 Blank; the new tungsten cored M993 Armor piercing ammunition can be used with the M60 as well, though it did not enter the inventory until long after the M60 was withdrawn from service in active-duty units. When firing blanks, the M13 or M13A1 Blank Firing Adapter (BFA) is necessary in order to get the weapon to cycle "full auto" with blanks. All of these ammunition types are delivered to the gun via NATO standard M13 disintegrating metallic split-link belt. The standard combat ammunition mix for the M60 consists of a four ball (M80) cartridges and one tracer (M62). The four to one ratio theorically allows the gunner to accuratelly "walk" the fire into the enemy. A skilled machine gunner also knows that tracer bullets do not always fly quite the same trajectory as ball, and weapon's sights must be used — particularly at ranges in excess of 800 meters, where 7.62 × 51 mm NATO tracer bullets usually burn out and are no longer visible (which is a problem with all weapons in this caliber; smaller-caliber tracer bullets, such as the 5.56 × 45 mm NATO used in the M249 SAW, hold even less tracer compound and differ greatly in weight from ordinary bullets. As a consequence, their trajectories are radically different from non-tracer bullets, and burn out at a mere 300 meters).
Main ammunition types
- M61 Armor-piercing
- M62 Tracer
- M80 Ball
- M82 Blank (used with M13A1 blank-firing attachment)
- M63 Dummy
All types are used with the M13 link, a metal link for disintegrating ammunition belts.
The M13A1 blank-firing attachment allows the gas system to still function with the blanks. It can be commonly seen on M60s during exercises and training. A small colored flag on the attachment allows the device to be seen at some distantce.
Variants
Many different variants of the M60 have been developed over the years. Most of the revisions have been aimed at rectifying problems with earlier designs; however, two versions (the M60C and the M60D) are modified for use primarily in aircraft.
Variant summary
- T161 — the M60's developmental designation before it was type-classified in the 1950s.
- M60 — the basic model, type-classified in 1957.
- M60E1 — an improved version that did not enter production.
- M60E2 — used in vehicles as a co-axial machine gun; electrically-fired.
- M60B — used in helicopters in the 1960s and 1970s; unmounted.
- M60C — used in fixed mounts in aircraft in the 1960s and 1970s; electrically-fired.
- M60D — replaced the M60B; a pintle-mounted version used especially in armament subsystem for helicopters, but also some other roles.
- M60E3 — an updated, lightweight version adopted in the 1980s.
- M60E4 (Mk 43 Mod 0/1) — an improved model of the 1990s that looks similar to the E3, but has many improvements. It has subvariants of its own, and is also used by the U.S. Navy (as the Mk 43 Mod 0/1). The Mk 43 Mod 1 is a specialized version with additions such as extra rails for mounting accessories.
M60
The initial version was officially adopted by the U.S. Army in the late 1950s, though at this time it was only intended for the infantry. It was known as the T161 before it was adopted (specifically the T161E3), and was chosen over the competing T52 during testing in 1950s. They both used a similar feed and were both gas-operated, but the T161 was easier to produce and its different internals performed better. The model that won the competition was the T161E3.
The model was type-classified in 1957, and entered production. It saw its first heavy use in the 1960s. The basic design has underdgone some smaller changes, and has been produced by different manufacturers.
M60E1
The M60E1 was the first major variant of the original M60. It did not go into full-scale production, though many of its features were included into the later E3 and E4 variants. Some of its features were also incorporated into the existing M60 production. This mainly changed how the gas cylinder, the barrel, and the bipod were connected; in the first iteration. The M60 and the M60E1 are two different versions. Opinions are varied on whether the M60E1 was officially adopted or not.
One of the more noticeable changes on the M60E1 is that the bipod attachment point was moved to the gas tube rather than the barrel (like on the later M60E3). It did not, however, have a forward pistol grip, as was added on the E3.
M60E2
The M60E2 is used on armored fighting vehicles, such as the M48A5, later M60 Patton versions and the K1 Type 88. It lacks many of the external components of the standard M60, including stock and grips. The M60E2 was electrically-fired, but had a manual trigger as a backup, as well as a metal loop at the back for charging. The gas tube below the barrel was extended to the full length of the weapon to vent the gas outside the vehicle. This version achieved a mean time between failures of 1,669 during testing in the 1970s, less than the FN MAG, which was adopted in 1977 as a co-axial vehicle gun, and designated the M240.
The M60E2 is used on the South Korea's K1 Type 88 tank as a co-axial weapon, along with a M60D on a pintle mount.
M60B
The M60B was a short-lived version designed to be fired from helicopters, with limited deployment made in the 1960s and 1970s. It was not mounted, just held, and was soon replaced by the pintle-mounted M60D. The 'B' model differed most noticeably in that it had no bipod and featured a different rear stock than the regular model. It still had a pistol grip (as opposed to spade grips). The M60B's advantge over pintle-mounted variants was that it had a wider and much less restricted field of fire.
M60C
The M60C is a variant of the standard M60 for aircraft-mounting, such as in helicopter armament subsystems. It lacks things like the bipod, pistol grip, and iron sights. The main difference between the standard M60 and the "C" variant is the electronic control system and the hydraulic swivel system used. It could be fired from the cockpit by the pilot or co-pilot. It is an electronically-controlled, hydraulic-powered, air-cooled, gas-operated, belt-fed weapon system. It used the M2, M6, and M16 armament subsystems and was mounted on the OH-13 Sioux, the OH-23 Raven, the UH-1B Huey, and the OV-10 Bronco. M60C production was on the order of several hundred.
M60D
The M60D is a mounted version of the standard M60. It can be mounted on boats, vehicles and as a pintle-mounted door gun in helicopters. When used in aircraft, it differs from the M60C in that it is not controlled by the pilot — rather, it is mounted in a door and operated by a member of the crew. Like the rest of the M60 family, it is an air-cooled, gas-operated, belt-fed weapon. Unlike other models, however, the M60D normally has spade grips and an aircraft ring-type sight or similar, as well as an improved ammunition feed system. A canvas bag is also affixed to the gun to control ejected casings and links, preventing them from being sucked into the rotor blades or into an engine intake. The M60D was equipped on the UH-1B Huey (using the M23, XM29, M59, and the Sagami mounts), the CH-47 Chinook (using the M24 and M41 mounts) in both door and ramp locations, the ACH-47A "Guns-A-Go-Go" variant of the Chinook (using the XM32 and XM33 mounts), and on the UH-60 Black Hawk (using the M144 mount).
M60E3
The M60E3 was fielded circa 1986 in an attempt to remedy problems with earlier versions of the M60 for infantry use. It is a lightweight, "improved" version intended to reduce the load carried by the gunner. Unlike its predecessors, the M60E3 has several updated modern features. It has a bipod (attached to the receiver) for improved stability, ambidextrous safety, universal sling attachments, a carrying handle on the barrel, and a simplified gas system. However, these features also caused almost as many problems for the weapon as they fixed. There were different types of barrels used, but the lightweight barrel was not as safe for sustained fire at 200 rounds per minute as heavier types. However, some personnel claim to have witnessed successful prolonged firing of the weapon. The stellite superalloy barrel liner makes it possible, but the excessive heat generated by this process can quickly make the gun unusable. There were two main barrels, a lightweight barrel and another heavier type — the former for when lighter weight was desired, and the latter for situations where more sustained fire was required.
The reduced-weight components also reduced the durability of the weapon, making it more prone to rapid wear and parts breakage than the original. Most infantry units in the U.S. Army and Marine Corps have now switched over to the M240 as their general-purpose machine gun, which is more reliable (particularly when dirty) and seems to be well-liked by the troops for its ruggedness, despite the fact that it weighs five or six pounds more than the M60E3.
M60E4 and Mk 43 Mod 0/1
This firearm is the latest generation of the M60 family and incorporates a number of improvements over other versions. Externally, it looks like somewhat like the M60E3, but it has other internal changes improvements. It features a different forward grip and is also a more reliable weapon than the other M60s. The M60E4/Mk 43 has higher pull for the belt, and is highly configurable. It is available in a variety of configurations, and it is also possible to convert some older models to this standard. The M60E4 and Mk 43 were primarily developed in the 1990s. First the E4, and soon after the Mk 43 — these early Mk 43 had some distinct differences from the E4 (such as a duckbill flash hider), though by the 2000s these distinctions seemed to have ended.
This version also has another designation under the Navy, Mk 43 Mod 0. The Mk 43 Mod 0 was developed for the U.S. Navy SEALs to replace their existing stock of M60E3 machine guns fitted with shorter "assault barrels". These weapons are identical to standard M60E4s, with the exception of the barrel length, and can be used either as suppressive fire or direct fire weapons, at least in terms of theory and training. The Mk 43 Mod 1 adds significantly more rail attachment points to the weapon's receiver cover and handguard.
The M60E4 and Mk 43 versions are roughly similar, although they are only part of the same family. While it might be fair to say that the Mk 43 are a type of M60E4, there are technical differences between any given M60E4 model. Early Mk 43s have certain differences over M60E4 from the same period, the most obvious being the duck-bill flash hider and different handguard. Current Mk 43s do not have these differences however, and the U.S. Ordnance website states in their FAQ, as of 2005, that the "M60E4 and the Mk43 are the same weapon system".
The M60E4 was pitted against the (then called) M240E4 in Army trials during the 1990s for new medium machine gun for the infantry, in a competition to replace the decades-old M60s. The M240E4 won, and was then classified as the M240B. This led to 1,000 existing M240 being sent to Fabrique Nationale for an overhaul and a special kit that modified them for use on ground (such as a stock, a rail, etc.). Afterwards, procurement contracts were let in the late 1990s for all-new M240B models. However, a new feature was added: a hydraulic buffer system to reduce the felt recoil similar to the M60 was incorporated. While the M240B had been more reliable in the tests, it was a few pounds heavier than the M60E4, and there is a program underway for a new lightweight medium machine gun in the early 2000s.
The M60E4 is not just another version, but a whole update to the series, that is also available in many of the previous configurations, such as a co-axial weapon. Kits are also offered to convert older models to the E4 standard.
- M60E4 (Light machine gun):
- Short barrel — weight: 10.2 kg (22.5 lb); length: 958 mm (37.7 in)
- Long barrel — weight: 10.5 kg (23.1 lb); length: 1,077 mm (42.4 in)
- Assault barrel — weight: 9.9 kg (21.3 lb); length: 940 mm (37.0 in)
- Width: 120 mm (4.8 in)
- M60E4 (Mounted):
- Length: 1,105 mm (43.5 in)
- Width: 149 mm (5.9 in)
- Weight: 10.7 kg (22.7 lb)
- M60E4 (Co-axial):
- Length: 1074 mm (42.3 in)
- Width: 120 mm (4.8 in)
- Weight: 9.6 kg (21.2 lb)
Civilian versions
A number of semi-automatic versions for the civilian market have been produced in the United States. The internals must be extensively modified to make it essentially impossible to convert them to fully-automatic weapons. If the design is approved by the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE), they are treated as belt-fed semi-automatic rifles; however, individual state and local regulations still apply.
The U.S. Ordnance company is the current maker authorized by Saco to produce mil-spec M60s and M60 parts. However, U.S. Ordnance put its civilian semi-auto sales on hold until 2006 because its production capacity is required for government orders. The company charges $8000 for a new semi-automatic M60.
Various makes of older fully-automatic versions are on the market as well, but there are many legal requirements to be met before purchasing them, and they cost upwards of U.S. $20,000–30,000. This is largely due to the restriction on the production of fully-automatic firearms in the U.S. for the general civilian market since 1986. The combination of banning production and importation has led many to think its illegal to own a machine gun, when, in fact, provided the various smaller legalities are met, it is legal to own and use a fully-automatic M60 machine gun.
Popular culture
The M60 has made numerous appearances in films and other media, especially Vietnam movies. Famous examples include Full Metal Jacket, Apocalypse Now, and various Rambo movies. It is also featured in many computer and video games, such as Hitman: Codename 47, Delta Force: Black Hawk Down, Vietcong, Battlefield Vietnam, The Specialists, Operation Flashpoint, Soldier of Fortune II, GTA series, and Perfect Dark Zero.
See also
- M240
- M2 machine gun
- List of firearms
- List of modern weapons
- List of individual weapons of the U.S. Armed Forces
- List of crew-served weapons of the U.S. Armed Forces
- AA-52
- Rambo (Rambo uses this weapon in First Blood and Rambo: First Blood Part II.)
References
- Federation of American Scientists: the M60
- Global Security: the M60E3
- Modern Firearms & Ammunition: the M60
- Department of the Army Field Manual No. 3-22.68
- U.S. Army TACOM — Rock Island
- MCWP 3-15.1 United States Marine Corps: "Machine Guns and Machine Gun Gunnery"
- Navy SEALs
- M60E4
Video links
- Nazarian`s Gun`s Recognition Guide (FILM) M60 Presentation (.MPEG)
- Video of the M60E4 machine gun on the range
- Video of skeptical evaluators testing the claimed capabilities of the M60E4.
External links
- US Ordnance Website (Current maker of M60s)
- Nazarian`s Gun`s Recognition Guide
- Military Factory Small Arms