Anaesthetic machine

The anaesthetic machine (or anesthesia machine in America) is used by anaesthetists to support the administration of anaesthesia. The commonest type of anaesthetic machine in use in the developed world is the continuous-flow anaesthetic machine, which is designed to provide an accurate and continuous supply of medical gases (such as oxygen and nitrous oxide), mixed with an accurate concentration of anaesthetic vapour (such as isoflurane), and deliver this to the patient at a safe pressure and flow. Modern machines incorporate a ventilator, suction unit, and patient-monitoring devices. The original concept was invented by the British anaesthetist H.E.G. Boyle in 1917. Prior to this time, anaesthetists often carried all their equipment with them, but the development of heavy, bulky cylinder storage and increasingly elaborate airway equipment meant that this was no longer practical for most circumstances. The anaesthetic machine is usually mounted on wheels for convenient transportation.

Simpler anaesthetic apparatus may be used in special circumstances, such as the TriService Apparatus, a simplified anaesthesia delivery system invented for the British armed forces, which is light, portable and may be used effectively even when no medical gases are available.

Components of a typical machine

A modern machine typically includes the following components:

connections to piped hospital oxygen, medical air, and nitrous oxide. Pipeline pressure from the hospital medical gas system (wall outlet) should be around 400kPa (60 psi; 4 atmospheres).
reserve gas cylinders of oxygen, air, and nitrous oxide attached via a specific yoke with a Bodok seal. Older machines may have cylinder yokes and flowmeters for carbon dioxide and cyclopropane. Many newer machines only have oxygen reserve cylinders. The regulators for the cylinders are set at 300kPa (45 psi; 3 atmospheres). If the cylinders are left on and the machine is plugged into the wall outlet, gas from the wall supply will be used preferentially, since it is at a higher pressure. In situations where pipeline gases are not available, machines may safely be used from cylinders alone, provided fresh cylinders are available.
a high-flow oxygen flush which provides pure oxygen at 30 litres/minute
pressure gauges and regulators to protect the machine components and patient from high-pressure gases
flow meters (rotameters) for oxygen, air, and nitrous oxide, which are used by the anaesthetist to provide accurate mixtures of medical gases to the patient. Flowmeters are typically pneumatic, but increasingly electromagnetic digital flowmeters are being used.
one or more anaesthetic vaporisers to accurately add volatile anaesthetics to the fresh gas flow
a ventilator
physiological monitors to monitor the patient's heart rate, ECG, blood pressure and oxygen saturation (additional monitors are generally available to monitor temperature, arterial blood pressure central venous pressure,etc). In addition, the composition of the gases delivered to the patient (and breathed out) is monitored continuously.
breathing circuits, most commonly a circle attachment
a heat and moisture exchanger (HME)
scavenging system to remove expired anaesthetic gases from the operating room. Scavenged gases are usually vented to the atmosphere.
suction apparatus

There is generally a small work bench built into the machine where airway management equipment is kept within ready reach of the anaesthetist.

Safety features of modern machines

Based on experience gained from analysis of mishaps, the modern anaesthetic machine incorporates several safety devices, including:

an oxygen failure alarm. In older machines this was a pneumatic device called a Ritchie whistle. Newer machines have an electronic sensor.
hypoxic-mixture alarms to prevent gas mixtures which contain less than 21% oxygen being delivered to the patient. In modern machines it is impossible to deliver 100% nitrous oxide (or any hypoxic mixture) to the patient to breathe. Oxygen is automatically added to the fresh gas flow even if the anaesthetist should attempt to deliver 100% nitrous oxide.
ventilator alarms, which warn of disconnection or high airway pressures
interlocks between the vaporisers preventing inadvertent administration of more than one volatile agent concurrently
alarms on all the above physiological monitors
the Pin-Index system, which prevents cylinders being accidentally connected to the wrong yoke
the NIST (Non-Interchangeable Screw Thread) system for pipeline gases, which prevents piped gases from the wall being accidentally connected to the wrong inlet on the machine
pipeline gase hoses have non-interchangeable Schrader valve connectors, which prevents hoses being accidentally plugged into the wrong wall socket

The functions of the machine should be checked at the beginning of every operating list in a "cockpit-drill". Machines and associated equipment must be maintained and serviced regularly.

Older machines may lack some of the safety features and refinements present on newer machines. However, they were designed to be operated without mains electricity, using compressed gas power for the ventilator and suction apparatus. Modern machines often have battery backup, but may fail when this becomes depleted.

The modern anaesthetic machine still retains all the key working principles of the Boyle's machine (a British Oxygen Company trade name in honour of the British anaesthetist H.E.G. Boyle (1875-1941).

A pre-use check of the anesthesia machine is recommended before every single case. Various regulatory and professional bodies have formulated checklists - see http://vam.anest.ufl.edu/guidelines.html. A free simulation of the checklist recommended by the United States Food & Drug Administration is available from the Virtual Anesthesia Machine web site ( see below) after registration which is also free.

External links

This medical article is a stub. You can help Wikipedia by expanding it.