Jump to content

Chemistry of ascorbic acid

From Wikipedia, the free encyclopedia
(Redirected from Ascorbic acid)

This article is about the molecular aspects of ascorbic acid. For information about its role in nutrition, see Vitamin C.
l-Ascorbic acid
Names
IUPAC name
(5R)-[(1S)-1,2-Dihydroxyethyl]-3,4-dihydroxyfuran-2(5H)-one
Other names
Vitamin C
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
EC Number
  • 200-066-2
E number E300 (antioxidants, ...)
KEGG
UNII
  • InChI=1S/C6H8O6/c7-1-2(8)5-3(9)4(10)6(11)12-5/h2,5,7-10H,1H2/t2-,5+/m0/s1 ☒N
    Key: CIWBSHSKHKDKBQ-JLAZNSOCSA-N ☒N
  • OC=1C(OC(=O)C=1O)[C@@H](O)CO
  • C([C@@H]([C@@H]1C(=C(C(=O)O1)O)O)O)O
Properties
C6H8O6
Molar mass 176.124 g·mol−1
Appearance White or light yellow solid
Density 1.65 g/cm3
Melting point 190 to 192 °C (374 to 378 °F; 463 to 465 K) decomposes
330 g/L
Solubility Insoluble in diethyl ether, chloroform, benzene, petroleum ether, oils, fats
Solubility in ethanol 20 g/L
Solubility in glycerol 10 g/L
Solubility in propylene glycol 50 g/L
Acidity (pKa) 4.10 (first), 11.6 (second)
Pharmacology
A11GA01 (WHO) G01AD03 (WHO), S01XA15 (WHO)
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
1
0
Lethal dose or concentration (LD, LC):
11.9 g/kg (oral, rat)[1]
Safety data sheet (SDS) JT Baker
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Ascorbic acid is an organic compound with formula C
6H
8O
6, originally called hexuronic acid. It is a white solid, but impure samples can appear yellowish. It dissolves freely in water to give mildly acidic solutions. It is a mild reducing agent.

Ascorbic acid exists as two enantiomers (mirror-image isomers), commonly denoted "l" (for "levo") and "d" (for "dextro"). The l isomer is the one most often encountered: it occurs naturally in many foods, and is one form ("vitamer") of vitamin C, an essential nutrient for humans and many animals. Deficiency of vitamin C causes scurvy, formerly a major disease of sailors in long sea voyages. It is used as a food additive and a dietary supplement for its antioxidant properties. The "d" form can be made via chemical synthesis, but has no significant biological role.

History

[edit]

The antiscorbutic properties of certain foods were demonstrated in the 18th century by James Lind. In 1907, Axel Holst and Theodor Frølich discovered that the antiscorbutic factor was a water-soluble chemical substance, distinct from the one that prevented beriberi. Between 1928 and 1932, Albert Szent-Györgyi isolated a candidate for this substance, which he called it "hexuronic acid", first from plants and later from animal adrenal glands. In 1932 Charles Glen King confirmed that it was indeed the antiscorbutic factor.

In 1933, sugar chemist Walter Norman Haworth, working with samples of "hexuronic acid" that Szent-Györgyi had isolated from paprika and sent him in the previous year, deduced the correct structure and optical-isomeric nature of the compound, and in 1934 reported its first synthesis.[2][3] In reference to the compound's antiscorbutic properties, Haworth and Szent-Györgyi proposed to rename it "a-scorbic acid" for the compound, and later specifically l-ascorbic acid.[4] Because of their work, in 1937 two Nobel Prizes: in Chemistry and in Physiology or Medicine were awarded to Haworth and Szent-Györgyi, respectively.

Chemical properties

[edit]

Acidity

[edit]

Ascorbic acid is a furan-based lactone of 2-ketogluconic acid. It contains an adjacent enediol adjacent to the carbonyl. This −C(OH)=C(OH)−C(=O)− structural pattern is characteristic of reductones, and increases the acidity of one of the enol hydroxyl groups. The deprotonated conjugate base is the ascorbate anion, which is stabilized by electron delocalization that results from resonance between two forms:

For this reason, ascorbic acid is much more acidic than would be expected if the compound contained only isolated hydroxyl groups.

Salts

[edit]

The ascorbate anion forms salts, such as sodium ascorbate, calcium ascorbate, and potassium ascorbate.

Esters

[edit]

Ascorbic acid can also react with organic acids as an alcohol forming esters such as ascorbyl palmitate and ascorbyl stearate.

Nucleophilic attack

[edit]

Nucleophilic attack of ascorbic acid on a proton results in a 1,3-diketone:

Oxidation

[edit]
Semidehydroascorbate acid radical
Pseudodehydroascorbate
Ascorbic_acid_all.svg
Dehydroascorbate

The ascorbate ion is the predominant species at typical biological pH values. It is a mild reducing agent and antioxidant, typically reacting with oxidants of the reactive oxygen species, such as the hydroxyl radical.

Reactive oxygen species are damaging to animals and plants at the molecular level due to their possible interaction with nucleic acids, proteins, and lipids. Sometimes these radicals initiate chain reactions. Ascorbate can terminate these chain radical reactions by electron transfer. The oxidized forms of ascorbate are relatively unreactive and do not cause cellular damage.

Ascorbic acid and its sodium, potassium, and calcium salts are commonly used as antioxidant food additives. These compounds are water-soluble and, thus, cannot protect fats from oxidation: For this purpose, the fat-soluble esters of ascorbic acid with long-chain fatty acids (ascorbyl palmitate or ascorbyl stearate) can be used as antioxidant food additives.

Ascorbate readily donates a hydrogen atom to free radicals, forming the radical anion semidehydroascorbate (also known as monodehydroascorbate), a resonance-stabilized semitrione:[5]

C6H7O−6 + L• → C6H6O6•− + LH

Loss of an electron from semidehydroascorbate to produce the 1,2,3-tricarbonyl pseudodehydroascorbate is thermodynamically disfavored, which helps prevent propagation of free radical chain reactions such as autoxidation:[5]

C6H6O6•− + O2 C6H6O6 + O2•−

However, being a good electron donor, excess ascorbate in the presence of free metal ions can not only promote but also initiate free radical reactions, thus making it a potentially dangerous pro-oxidative compound in certain metabolic contexts.

Semidehydroascorbate oxidation instead occurs in conjunction with hydration, yielding the bicyclic hemiketal dehydroascorbate. In particular, semidehydroascorbate undergoes disproportionation to ascorbate and dehydroascorbate:[5]

C6H6O6•− + L• + H2O + H+ → C6H8O7 + LH
2 C6H6O6•− + H2O + H+ → C6H8O7 + C6H7O−6

Aqueous solutions of dehydroascorbate are unstable, undergoing hydrolysis with a half-life of 5–15 minutes at 37 °C (99 °F). Decomposition products include diketogulonic acid, xylonic acid, threonic acid and oxalic acid.[6][7]: 14 

Other reactions

[edit]

It creates volatile compounds when mixed with glucose and amino acids at 90 °C.[8]

It is a cofactor in tyrosine oxidation.[9]

Uses

[edit]

Food additive

[edit]

The main use of l-ascorbic acid and its salts is as food additives, mostly to combat oxidation. It is approved for this purpose in the EU with E number E300,[10] the US,[11] Australia, and New Zealand.[12]

Dietary supplement

[edit]

Another major use of l-ascorbic acid is as a dietary supplement. It is on the World Health Organization's List of Essential Medicines.[13]

Niche, non-food uses

[edit]
  • Ascorbic acid is easily oxidized and so is used as a reductant in photographic developer solutions (among others) and as a preservative.[citation needed]
  • In fluorescence microscopy and related fluorescence-based techniques, ascorbic acid can be used as an antioxidant to increase fluorescent signal and chemically retard dye photobleaching.[14]
  • It is also commonly used to remove dissolved metal stains, such as iron, from fiberglass swimming pool surfaces.[citation needed]
  • In plastic manufacturing, ascorbic acid can be used to assemble molecular chains more quickly and with less waste than traditional synthesis methods.[15]
  • Heroin users are known to use ascorbic acid as a means to convert heroin base to a water-soluble salt so that it can be injected.[16]
  • As justified by its reaction with iodine, it is used to negate the effects of iodine tablets in water purification. It reacts with the sterilized water, removing the taste, color, and smell of the iodine. This is why it is often sold as a second set of tablets in most sporting goods stores as Potable Aqua-Neutralizing Tablets, along with the potassium iodide tablets.[citation needed]
  • Intravenous high-dose ascorbate is being used as a chemotherapeutic and biological response modifying agent.[17] It is undergoing clinical trials.[18]
  • It is sometimes used as a urinary acidifier to enhance the antiseptic effect of methenamine.[19][20]

Synthesis

[edit]

Natural biosynthesis of vitamin C occurs through various processes in many plants and animals.

Industrial preparation

[edit]
The outdated but historically significant industrial synthesis of ascorbic acid from glucose via the Reichstein process

Seventy percent of the world's supply of ascorbic acid is produced in China.[21] Ascorbic acid is prepared in industry from glucose in a method based on the historical Reichstein process. In the first of a five-step process, glucose is catalytically hydrogenated to sorbitol, which is then oxidized by the microorganism Acetobacter suboxydans to sorbose. Only one of the six hydroxy groups is oxidized by this enzymatic reaction. From this point, two routes are available. Treatment of the product with acetone in the presence of an acid catalyst converts four of the remaining hydroxyl groups to acetals. The unprotected hydroxyl group is oxidized to the carboxylic acid by reaction with the catalytic oxidant TEMPO (regenerated by sodium hypochlorite – bleaching solution). Historically, industrial preparation via the Reichstein process used potassium permanganate as the bleaching solution. Acid-catalyzed hydrolysis of this product performs the dual function of removing the two acetal groups and ring-closing lactonization. This step yields ascorbic acid. Each of the five steps has a yield larger than 90%.[22]

A biotechnological process, first developed in China in the 1960s but further developed in the 1990s, bypassing acetone-protecting groups. A second genetically modified microbe species, such as mutant Erwinia, among others, oxidises sorbose into 2-ketogluconic acid (2-KGA), which can then undergo ring-closing lactonization via dehydration. This method is used in the predominant process used by the ascorbic acid industry in China, which supplies 70% of the world's ascorbic acid.[21] Researchers are exploring means for one-step fermentation.[23][24]

Determination

[edit]

The traditional way to analyze the ascorbic acid content is by titration with an oxidizing agent, and several procedures have been developed.

The popular iodometry approach uses iodine in the presence of a starch indicator. Iodine is reduced by ascorbic acid, and when all the ascorbic acid has reacted, the iodine is in excess, forming a blue-black complex with the starch indicator. This indicates the end-point of the titration.

As an alternative, ascorbic acid can be treated with iodine in excess, followed by back titration with sodium thiosulfate using starch as an indicator.[25]

This iodometric method has been revised to exploit the reaction of ascorbic acid with iodate and iodide in acid solution. Electrolyzing the potassium iodide solution produces iodine, which reacts with ascorbic acid. The end of the process is determined by potentiometric titration like Karl Fischer titration. The amount of ascorbic acid can be calculated by Faraday's law.

Another alternative uses N-bromosuccinimide (NBS) as the oxidizing agent in the presence of potassium iodide and starch. The NBS first oxidizes the ascorbic acid; when the latter is exhausted, the NBS liberates the iodine from the potassium iodide, which then forms the blue-black complex with starch.

See also

[edit]

References

[edit]
  1. ^ Safety (MSDS) data for ascorbic acid. University of Oxford
  2. ^ Story of Vitamin C's chemical discovery. Profiles.nlm.nih.gov. Retrieved on 2012-12-04.
  3. ^ Davies MB, Austin J, Partridge DA (1991). Vitamin C: Its Chemistry and Biochemistry. The Royal Society of Chemistry. p. 48. ISBN 0-85186-333-7.
  4. ^ Svirbelf JL, Szent-Györgyi A (April 25, 1932). "The Chemical Nature Of Vitamin C" (PDF). Science. 75 (1944): 357–8. Bibcode:1932Sci....75..357K. doi:10.1126/science.75.1944.357-a. PMID 17750032. S2CID 33277683.. Part of the National Library of Medicine collection. Accessed January 2007
  5. ^ a b c Njus D, Kelley PM, Tu YJ, Schlegel HB (November 2020). "Ascorbic acid: The chemistry underlying its antioxidant properties". Free Radical Biology and Medicine. 159: 37–43. doi:10.1016/j.freeradbiomed.2020.07.013.
  6. ^ Gaonkar AG, McPherson A (2016-04-19). Ingredient Interactions: Effects on Food Quality, Second Edition. CRC Press. ISBN 9781420028133.
  7. ^ Linster CL [in Luxembourgish], Van Schaftingen E (January 2007). "Vitamin C: Biosynthesis, recycling and degradation in mammals". The FEBS Journal. 274 (1): 1–22. doi:10.1111/j.1742-4658.2006.05607.x.
  8. ^ Seck, S., Crouzet, J. (1981). "Formation of Volatile Compounds in Sugar-Phenylalanine and Ascorbic Acid-Phenylalanine Model Systems during Heat Treatment". Journal of Food Science. 46 (3): 790–793. doi:10.1111/j.1365-2621.1981.tb15349.x.
  9. ^ Sealock RR, Goodland RL, Sumerwell WN, Brierly JM (May 1952). "The role of ascorbic acid in the oxidation of L-Tyrosine by guinea pig liver extracts" (PDF). The Journal of Biological Chemistry. 196 (2): 761–7. doi:10.1016/S0021-9258(19)52407-3. PMID 12981016.
  10. ^ UK Food Standards Agency: "Current EU approved additives and their E Numbers". Retrieved 2011-10-27.
  11. ^ US Food and Drug Administration: "Listing of Food Additives Status Part I". Food and Drug Administration. Archived from the original on 2012-01-17. Retrieved 2011-10-27.
  12. ^ Australia New Zealand Food Standards Code"Standard 1.2.4 – Labelling of ingredients". 8 September 2011. Retrieved 2011-10-27.
  13. ^ World Health Organization (2023). The selection and use of essential medicines 2023: web annex A: World Health Organization model list of essential medicines: 23rd list (2023). Geneva: World Health Organization. hdl:10665/371090. WHO/MHP/HPS/EML/2023.02.
  14. ^ Widengren J, Chmyrov A, Eggeling C, Löfdahl PA, Seidel CA (January 2007). "Strategies to improve photostabilities in ultrasensitive fluorescence spectroscopy". The Journal of Physical Chemistry A. 111 (3): 429–40. Bibcode:2007JPCA..111..429W. doi:10.1021/jp0646325. PMID 17228891.
  15. ^ Vitamin C, water have benefits for plastic manufacturing. Reliable Plant Magazine. 2007. Archived from the original on 2007-09-27. Retrieved 2007-06-25.
  16. ^ Beynon CM, McVeigh J, Chandler M, Wareing M, Bellis MA (December 2007). "The impact of citrate introduction at UK syringe exchange programmes: a retrospective cohort study in Cheshire and Merseyside, UK". Harm Reduction Journal. 4 (1): 21. doi:10.1186/1477-7517-4-21. PMC 2245922. PMID 18072971.
  17. ^ "The Riordan IVC Protocol for Adjunctive Cancer Care: Intravenous Ascorbate as a Chemotherapeutic and Biological Response Modifying Agent" (PDF). Riordan Clinic Research Institut. February 2013. Archived (PDF) from the original on 2022-10-09. Retrieved 2 February 2014.
  18. ^ "High-Dose Vitamin C (PDQ): Human/Clinical Studies". National Cancer Institute. 2013-02-08. Retrieved 2 February 2014.
  19. ^ Strom JG, Jun HW (1993). "Effect of urine pH and ascorbic acid on the rate of conversion of methenamine to formaldehyde". Biopharmaceutics & Drug Disposition. 14 (1): 61–69. doi:10.1002/bdd.2510140106. PMID 8427945. S2CID 11151179.
  20. ^ Nahata MC, Cummins BA, McLeod DC, Schondelmeyer SW, Butler R (1982). "Effect of urinary acidifiers on formaldehyde concentration and efficacy with methenamine therapy". European Journal of Clinical Pharmacology. 22 (3): 281–284. doi:10.1007/bf00545228. PMID 7106162. S2CID 31796137.
  21. ^ a b "Vantage Market Research: Global Vitamin C Market Size & Share to Surpass $1.8 Bn by 2028". Globe Newswire (Press release). 8 November 2022. Retrieved 21 December 2023.
  22. ^ Eggersdorfer, M., et al. "Vitamins". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a27_443. ISBN 978-3527306732.
  23. ^ Zhou M, Bi Y, Ding M, Yuan Y (2021). "One-Step Biosynthesis of Vitamin C in Saccharomyces cerevisiae". Front Microbiol. 12: 643472. doi:10.3389/fmicb.2021.643472. PMC 7947327. PMID 33717042.
  24. ^ Tian YS, Deng YD, Zhang WH, Yu-Wang, Xu J, et al. (August 2022). "Metabolic engineering of Escherichia coli for direct production of vitamin C from D-glucose". Biotechnol Biofuels Bioprod. 15 (1): 86. doi:10.1186/s13068-022-02184-0. PMC 9396866. PMID 35996146.
  25. ^ "A Simple Test for Vitamin C" (PDF). School Science Review. 83 (305): 131. 2002. Archived from the original (PDF) on July 4, 2016.

Further reading

[edit]
[edit]
Wikimedia Commons has media related to Chemistry of ascorbic acid.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Chemistry_of_ascorbic_acid&oldid=1264238178"