Jump to content

North Carolina Highway 481

From Wikipedia, the free encyclopedia
North Carolina Highway 481 marker
North Carolina Highway 481
Route information
Maintained by NCDOT
Length21.0 mi[1] (33.8 km)
Existed1937–present
Major junctions
West end NC 4 / NC 48 in Glenview
Major intersections I-95 near Glenview
US 301 near Enfield
East end NC 561 in Tillery
Location
CountryUnited States
StateNorth Carolina
CountiesHalifax
Highway system
NC 461 I-485

North Carolina Highway 481 (NC 481) is a 21-mile (34 km) primary state highway in the U.S. state of North Carolina, connecting Enfield to nearby Interstate 95 (I-95) and the surrounding farmlands of southern Halifax County.

Description

[edit]

NC 481 is a two-lane rural highway that serves primarily as a farm-to-market route[citation needed] rather than as one to destinations other than Enfield. It begins at an intersection with NC 4/NC 48 in the community of Glenview, then proceeds east, quickly connecting with I-95 along the way. Near Enfield, NC 481 Business goes straight into the downtown area, while NC 481 meets U.S. Route 301 (US 301) before entering the town. After passing through town, it splits with US 301 north of Enfield and continues northeasterly. After connecting with NC 125/NC 903, it ends at NC 561 in the community of Tillery, near the banks of the Roanoke River.

History

[edit]

NC 481 made three brief appearances before the routing that exists today. The first NC 481 appeared in 1925 as a new primary routing from NC 48 in Roanoke Rapids, to NC 40 in Pleasant Hill. In 1926, NC 40 was rerouted and replaced all of the first NC 481, quickly lead to the second establishment of NC 481 to replace an old alignment of NC 40 from Garysburg to Pleasant Hill. In 1930, NC 40 and NC 481 switched routes again, ending the second and the start of the third, from NC 48 in Roanoke Rapids, to NC 40 in Pleasant Hill.[2] In 1932, the third NC 481 was renumbered NC 40A.

The fourth and current NC 48 was established in 1937 as a new primary routing from NC 48 in Glenview to NC 561 in Tillery.[3] In 2007, NC 481 was rerouted south of Enfield to US 301 before traveling back through town; the old alignment became NC 481 Business.[4]

Junction list

[edit]

The entire route is in Halifax County.

Locationmi[1]kmDestinationsNotes
Glenview0.00.0 NC 4 / NC 48 – Rocky Mount, Roanoke RapidsWestern terminus
2.64.2 I-95 – Rocky Mount, Roanoke RapidsExit 154 (I-95)
6.911.1

NC 481 Bus. east – Enfield
8.012.9
US 301 south – Rocky Mount
South end of US 301 overlap
Enfield9.315.0

NC 481 Bus. west (Whitaker Street)
11.117.9
US 301 north – Halifax
North end of US 301 overlap
16.326.2 NC 125 / NC 903 – Scotland Neck, Halifax
Tillery21.033.8 NC 561 – Rich Square, HalifaxEastern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Special routes

[edit]

Enfield business loop

[edit]
Business plate.svg
North Carolina Highway 481 Business marker
North Carolina Highway 481 Business
LocationEnfield, North Carolina
Length1.7 mi[5] (2.7 km)
Existed2007–present

North Carolina Highway 481 Business (NC 481 Bus) was established in 2007, when NC 481 was rerouted onto new bypass south onto US 301. The business loop travels along Glenview Road, Whitfield Street and Whitaker Street.[4]

References

[edit]
  1. ^ a b "North Carolina Highway 481" (Map). Google Maps. Retrieved May 13, 2014.
  2. ^ State Highway System of North Carolina (PDF) (Map). Cartography by NCDOT. North Carolina Department of Transportation. 1930. Retrieved May 14, 2014.
  3. ^ North Carolina Primary Highway System (PDF) (Map). Cartography by NCDOT. North Carolina Department of Transportation. 1940. Retrieved May 14, 2014.
  4. ^ a b "Route Change (2007-06-19)" (PDF). North Carolina Department of Transportation. June 19, 2007. Retrieved May 13, 2014.
  5. ^ "NC 481 Business - Enfield, North Carolina" (Map). Google Maps. Retrieved May 13, 2014.
[edit]
KML is from Wikidata